Testing platform usage method

　　Cast iron platformThe inspection platform is a measurement benchmark for checking the geometric tolerances of mechanical parts, flatness, parallelism, straightness, etc. The inspection platform can also be used for marking, grinding, processing, and measurement of general and precision parts.Customized cast iron partsThe inspection platform is a reference plane used for precise measurement in the production workshop or metrology department; The inspection platform is a platform that exists with high flatness, which can be divided into 0, 1, 2, and 3 according to the standards of the mechanical department. The accuracy requirements for the inspection platform are highTesting PlatformThe price is high, the storage conditions of the inspection platform are high, and the cost of using the inspection platform is high

When installing the inspection platform, try to adjust the level of the working surface of the inspection platform as much as possible,Cast iron platformThe support used to support the inspection platform should be supported at the main pivot point to prevent deformation of the inspection platform. When using the inspection platform, after inspecting or completing the marking work, the casting or workpiece should be moved down from the inspection platform to prevent the workpiece from being pressed on the inspection platform for a long time,cast iron surface plateCausing deformation of the inspection platform. After using the inspection platform, it is necessary to clean the working surface of the inspection platform, and then apply a layer of rust proof oil on the working surface of the inspection platform. If the inspection platform is not used for a long time, a layer of rust proof oil or butter should be brushed on the surface of the inspection platform, and then wrapped in oil paper. If the wooden packaging cover used to purchase the inspection platform is retained, it is better to cover the inspection platform with a packaging cover when the inspection platform is no longer in use. The place where the inspection platform is placed needs to be dry and ventilated. It should not be placed in a damp place, and there should be no water droplets on the inspection platform. Afterwards, the inspection platform needs to undergo regular inspections, and the inspection cycle can be determined according to the specific situation of use. Usually, the inspection platform needs to be inspected once every 6 to 12 months.

　　Crossed platformDebugging method: Before using the inspection platform, personnel should fix and debug the inspection platform, and only after debugging can the inspection platform be used.

The specific methods for installing and debugging the platform correctly are as follows:

Before using the inspection platform,3D flexible welding platformWe need some staff to test and debug the inspection platform before it can be used. When installing the inspection platform, the bracket supporting the inspection platform should be placed at the main support point. When supporting, the working surface of the inspection platform should be adjusted to the horizontal plane.

Step 2 of riveting and welding platform: When using the inspection platform, the mechanical equipment parts should be handled gently to prevent strong collision between the mechanical equipment parts and the inspection platform, reduce the accuracy of the inspection platform, and affect the inspection results of the inspection platform. If there is a collision between the surface of the inspection platform and mechanical parts, the concave or convex parts affected by the impact should be repaired before continuing to use.

The third step is to keep the surface of the inspection platform clean. After using the inspection platform, the surface of the inspection platform should be cleaned in a timely manner to avoid residual iron filings, sand or other impurities from mechanical parts falling off the surface of the inspection platform. These iron filings and impurities can easily react with the cast iron on the surface of the inspection platform in humid air, leading to rusting and corrosion of the inspection platform surface. Even if not in humid air, these impurities can easily scratch the surface of the inspection platform, causing a decrease in accuracy. Therefore, they must be cleaned in a timely manner.

Step 4: When using the inspection platform, it is advisable to ensure that all parts of the platform are used evenly to avoid local wear and tear caused by excessive use.

Step 5: When installing mechanical equipment parts, do not install them on the inspection platform, and do not use tools such as hammers or pliers to strike the inspection platform.

Step 6: After using the inspection platform, it should be wiped clean. If it is not used for a long time, anti rust oil should be brushed on the surface of the inspection platform to prevent rusting.

Step 7: The handling and inspection platform should be handled with caution, and rough operations are strictly prohibited.

Step 8: The inspection platform should be stored in a dry and ventilated warehouse, and should not be placed in cold or damp places, let alone any water droplets on the surface of the inspection platform.

Step 9: The inspection platform cannot be stacked for storage to prevent deformation caused by stacking and squeezing.

Botou Kaichuang is an inspection platform, inspection platform maintenance, inspection platform repair. For detailed information on inspection platform, inspection platform maintenance, and inspection platform repair, please call Botou Kaichuang,