Temperature and humidity controller

NegotiableUpdate on 05/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Temperature and humidity controller

Product Details

Color touch screen intelligent temperature and humidity controller
WM-HR8088Series Color Touch Screen Intelligent Temperature and Humidity Controller
Intelligent control instruments using Siemens panels and TFT color touch screens, widely used inIntelligent artificial climate chamber, intelligent light cultivation chamber (seed chamber)、Intelligent Biochemical Incubator、Constant temperature and humidity chamber、Mold incubator, carbon dioxide incubatorArtificial climate chamber can also be used in occasions with temperature, humidity, and lighting requirements, such as computer room air conditioning, precision air conditioning, cold storage, etc

main features

· Adopting Siemens panels and stainless steel panels, the appearance is elegant.

· Adopting a 3.2-inch TFT color screen. Data and parameters are input through touch, with a user-friendly human-machine interface that allows for what you see to be what you get. Customers can operate without the need for user manuals

· The parameter settings are simple, and can be completed in one go according to the interface prompts.

· The sensor adopts an integrated digital temperature and humidity sensor, which is maintenance free and highly reliable

· Software zero and full adjustment, temperature and humidity compensation, amplifier self stabilizing zero, display accuracy better than 0.5% FS

· Fuzzy theory combined with traditional PID method, fast and stable control, advanced self-tuning scheme

· Multiple output channels: commonly used ones include fans, heaters, compressors (2 channels), humidifiers, dehumidifiers, fault lights, etc

Four groups of supplementary lights, special signals can be customized. Plus 2 PID outputs, directly driving solid-state relays.

Specification

1.inputDigital integrated temperature and humidity sensor (used in conjunction).

2.Basic errorInput ± 0.5% ± 1 word of full scale

3.temperature rangeTemperature -25-80 ℃, humidity 0-100%

4.resolution： 0.1℃0.1%

5.sampling period: 1 time/sec

6.Operation modeThe program runs in 50 segments, each of which can set temperature, humidity, number of supplementary lighting groups, time, etc

Time * up to 9999 minutes, can be set in cycles, * up to 9999 cycles.

7.Setting methodChinese menu, touch screen input

8.Viewing methodYou can view the current status of each output port, measured temperature and humidity values, number of cycles, number of running segments, running time, set total time, and remaining time.

9.AlarmExternal input alarm, with Chinese prompts appearing during the alarm, such as high indoor temperature, low indoor temperature, compressor failure, heater failure, humidifier failure, dehumidifier failure, humidifier water shortage, and other faults.

10.Alarm output:The relay contact AC250V 3A (resistance) can be connected to a fault light to provide a warning.

11.control outputFour sets of fans, heaters, compressors (2 channels), humidifiers, dehumidifiers, fault lights, and fill lights. Special signals can be customized (up to 16 channels). Plus 2 PID outputs, directly driving solid-state relays.

12.control modeFuzzy PID control+hysteresis control

The compressor and dehumidifier have start-up interval settings to ensure the safety of the compressor.

The fan has a shutdown delay function. (After shutdown, other outputs are turned off, and the fan continues to run for 30 seconds before turning off to prevent residual heat and cold from staying inside the machine)

13.Power supply voltage:Using Jinshengyang module power supply, directly connect AC85-264V (50/60Hz) mains power externally

14.work environmentTemperature 0-50 ℃, humidity<85% RH

15.Panel size： 86 × 86mm. Hole size 71 × 71mm