Technical specifications of nitrogen blower

Model: HSC–24BA

1. working environment

1.1. Working temperature: 10~35 ℃

1.2. Working humidity: 20~80%

1.3. Working environment: Power supply 220V ± 10%, 50Hz ± 1Hz

2. Scope of application
The nitrogen blower uses nitrogen or other compressed gases to blow the heated sample solution, rapidly concentrating the sample to be processed and achieving the effect of rapid separation and purification. When using inert gases such as nitrogen as gas sources, it can protect highly active substances and prevent reactions with oxygen in the air.

3. Technical Specifications

1.

2.

3.

1.

2.

3.

3.1. Heating method: water bath heating;

3.2. Temperature control range: room temperature~95 ℃;

3.3.※Control method: Split touch screen;

3.4. Digital display of parameters such as air pressure, temperature, and time

3.5. Adopting PID technology and capable of achieving over temperature alarm;

3.6. Temperature control accuracy: ± 1 ℃;

3.7.※The water bath is 360 ° fully transparent, making it easy to observe the concentration of the sample;

3.8.※Water bath lighting for better observation of samples

3.9.※Water level alarm function

3.10. Nitrogen needle usage: The gas needle channels on the distribution chamber can be combined or used separately, and the height and horizontal position of the nitrogen blowing needle can be adjusted separately;

3.11.※Each nitrogen blowing channel comes standard with a flow control valve with a digital dial to ensure parallelism and clarity

3.12.※Nitrogen regulation method: knob with 8 gears adjustable;

3.13. The height of the distribution room can be adjusted;

3.14. Number of sample processing positions: 24;

3.15. Gas flow rate: 0~15L/min, equipped with gas flow control valve;

3.16.※Type of glassware placement: Spring design fixture, can hold various specifications of glassware such as beakers (50mL, customized test tube racks for large volume beakers), test tubes, centrifuge tubes (1mL~50mL), measuring cylinders, etc;

3.17.※The sample rack can rotate 360 °;

3.18. The components in contact with the solvent are made of 316L stainless steel material, which has a long service life and is easy to clean;

3.19. Size: φ 360x720mm