TCDRY-1800LT Intelligent Capacitive Level Gauge

The TCDR-1800LT intelligent capacitive level gauge is a new generation of high-tech level gauge independently developed by our company based on market demand. Its practicality and effectiveness are gradually favored by large and medium-sized chemical enterprises This level gauge is not affected by dust or hanging materials and has on-site calibration function. Users can automatically calibrate the "zero point" and "range" through buttons to adapt to different requirements in various complex places. It can be widely used in the field of level detection and control of various solid materials such as powder silos, grain silos, material pools, and medicine barrels.

1. Strong practicality, button settings, simple operation, and accurate calibration.

3. Adopting software and hardware anti-interference and error correction technology, there is no need for isolation in non explosion proof places, and the network is directly connected to reduce circuit complexity and cost.

3、 Main performance indicators

Environmental temperature: -40~60 ℃;

Probe diameter: ¢ 20mm. Please specify any special requirements before placing an order;

Wetting material: stainless steel;

Long term stability: ≤ 0.2% FS/year;

Fixed method: 1. Threaded installation;

3. Please specify any special requirements before placing an order;

Applicable media: can detect particles, fly ash, conductive and non-conductive solid dust, viscous materials, etc;

Application scope and characteristics of capacitive level gauge

It has the advantages of simple structure, easy installation, and reliable performance; At the same time, the electrode is made of stainless steel material, has strong corrosion resistance, can be used with insulation and conductive materials, and requires minimal maintenance.

It can be applied to level monitoring in open or pressurized containers in industries such as petroleum, chemical, power, metallurgy, and environmental protection.

Main technical parameters of capacitive level gauge

Environmental temperature: -40~45 ℃

Relative humidity: 5% to 99% (including direct humidity)

Environmental pressure: 86kPa~108 kPa

Working voltage: DC24V

Output signal: two-wire DC4-20mA

Load resistance: 0~250 Ω (power supply DC24V)

Measurement range: pole type 0~3500mm, cable type 2~20m can be selected freely within the range

Measurement accuracy: ≤± 1% F • S: (± 5mm within 1m)

Protection level: IP65

Process temperature: Ordinary type: -20~60 ℃

Medium temperature type: -40~150 ℃

High temperature type: -40~200 ℃

Medium pressure: Pressure type ≤ 3MPa (other models are atmospheric pressure)

Capacity range: minimum value of 20PF, value of 5000PF (adjustable)