TC740-EJF5A-69WA Intelligent Differential Pressure Transmitter

NegotiableUpdate on 05/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

TC740-EJF5A-69WA intelligent differential pressure transmitter, with a power supply voltage of 24VDC and a range of 0-18.063KPa. It supports hart communication and has an adjustable output range of 4-20mA. The two-wire wiring range can be adjusted with an accuracy of 0.5 level. It comes with a matching three valve group and assembly bolts. The inlet of the three valve group is (2x): M20 * 1.5 (loose fitting welding conduit) (center distance 35mm), and the outlet is (2x): matched with the transmitter

Product Details

TC740-EJF5A-69WAIntelligent differential pressure transmitter(Multi parameter type)

Differential pressure transmitterTechnical Specifications:

1. Target audience: liquids, gases, or vapors
2. Output signal:4～20mADC. (Special can be four wire system)200V ACpower supply0-10mA DCOutput)
3. Power supply voltage:12-36V DC, standard value24VDC；
4. Environmental temperature:-25～70℃ (typical transmitter),-15～70℃ (with on-site indicator)
5. Temperature measurement:-40-104℃, flange filled with silicone oil-40-104℃, filled with high-temperature silicone oil15-315℃；
6. Storage temperature:-40～100℃；
7. Relative temperature:0-99%RH；
8. Protection level:dⅡBT4，iaⅡCT5；
9. Power supply impact: less than ± of the output range0.005%/V；
10. Vibration effect: Vibration in any direction200HzThe error caused is within the range of * *0.05%/g；
11. Installation position impact: When the working membrane is not installed vertically, it may result in a deviation of no more than0.24PaThe zero position error may be eliminated by adjusting the zero position, which affects the range;
12. Stability: Within six months, it shall not exceed the accuracy of the transmitter;
13. Indicator: Linear indicator0～99%；3-1/2bitLCDlcd;
14. Range and zero position: externally continuously adjustable;
15. Positive and negative migration: * * The positive migration amount is500%The negative transfer amount is600%；
16. Material isolation membrane:316LStainless steel, Hastelloy-CMonel alloy, tantalum;
Exhaust/Drain Valve:316LStainless steel, Hastelloy-CMonel alloy;
Flanges and fittings: 316L stainless steel, Hastelloy alloy-CMonel alloy;
“O”Ring: Fluororubber; Fill with liquid; Silicone oil inert oil; Bolt:316Lstainless steel; Electronic casing: low copper aluminum alloy;