TB-150-5 medium pressure transparent fan

TB-150-5 medium pressure transparent fanFeatures:
1、 The blades and covers of the Touareg medium pressure fan are made of the world's hardest ADC12 material, equivalent to the same material as Mercedes Benz wheel rims.
2、 The bearings of the Toupu medium pressure fan are imported bearings with high speed and high temperature resistance. They can rotate at 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz without lubrication or maintenance for 150000 hours, equivalent to continuous operation for 17 years.
3、 The inlet and outlet of the transparent medium pressure fan are equipped with built-in noise reduction pipes to achieve low noise.
4、 Models below 1.1KW of the Toupu medium pressure fan can be used at full pressure.
5、 The pressure of the turbo type medium pressure fan is stable, and it has been proven through practical applications in water treatment and electroplating that the stirring is uniform and the water wave rolling height is consistent.
6、 Under the same power and pressure, the flow rate of the turbo type medium pressure fan is greater than that of similar products.
7、 The transparent medium pressure fan cover adopts a sheet-like heat dissipation design, which is equivalent to a motorcycle engine heat dissipation device, greatly reducing the temperature during fan operation.
8、 The turbo type medium pressure fan adopts the principle of bearing pre design, with two bearings placed at the front end of the fan blades and the rear end of the motor, achieving dynamic balance configuration and facilitating heat dissipation. (The reason is that there are heat dissipation fins at the front end of the fan blades for heat dissipation, while the bearings at the back end work under the built-in cooling fan of the fan, thus keeping the bearings working for a long time at low temperatures.)
9、 The turbo type medium pressure fan adopts a special shock-absorbing foot design, which greatly reduces the vibration generated during the operation of the fan.
10、 The turbo type medium pressure fan is economical and energy-saving. At the same power, pressure, and flow rate, the current of a full wind high-pressure fan is lower than that of other similar products.

TB-150-5 medium pressure transparent fanPurpose:

Boiler circulating hot air, laboratory experiments, equipment matching, powder conveying, textile weaving and dust collection, paper cutting machine air cushion, sewage treatment, industrial mining blower, heavy oil spraying and burning, paper pulp dewatering, shuttle free weaving machine, glass industry and ice factory air pump, tunnel engineering compressed air, aquaculture oxygen supply, printing machinery, combustion machine, plastic extrusion machine, blowing bag machine laminating machine, fruit making machinery, dust collector, environmental machinery, hot air generator, powder conveying, kitchen machinery, woodworking machinery, dryer, incinerator, constant temperature box, mechanical cooling, general air supply.

Precautions
If the flow rate is found to be too high, does not meet the usage requirements, or requires a smaller flow rate in a short period of time, a throttling device can be used for adjustment.
2. Regularly check the sensitivity of thermometers and oil gauges, and control the oil level in the bearing box within the specified allowable range.
3. If any abnormal phenomenon is found during the driving, parking or operation of the through type blower, it should be checked immediately.
4. For minor faults discovered during inspection, the cause should be promptly identified and efforts should be made to eliminate or handle them. If minor faults cannot be eliminated or major faults are discovered, immediate inspection should be carried out.
5. In addition to replacing the lubricating oil after each disassembly and repair of the turbo blower, the lubricating oil should also be replaced regularly.
6. The bearing seat of E-type transmission should be regularly (quarterly) inspected, cleaned, and lubricated to prevent bearing burnout.