Superpure water machine for SYUP-E biochemical analyzer

The SYUP-E biochemical analyzer's ultrapure water machine is designed and produced according to the water needs of the biochemical laboratory. The equipment has stable performance and high efficiency, providing high-quality laboratory water. The effluent quality even exceeds national standards. In addition, optional features can be added for exclusive customization according to your needs.

(Water production capacity: It is recommended that customers choose the water outlet model based on a daily calculation of 6 hours)

The utilization of reverse osmosis in ultrapure water equipment:

The commonly known flow pattern of water is from low concentration liquid to high concentration liquid. Once water is pressurized, it will flow from high concentration to low concentration. This pattern is called reverse osmosis principle.
Ultra pure water equipment uses reverse osmosis to produce ultra pure water, mainly utilizing the fine pore size on the RO membrane to achieve filtration effect. Generally, the pore size of the RO membrane is about one millionth of a human hair (0.0001 microns), while the diameter of viruses is generally between 0.02-0.4 microns, the diameter of ordinary bacteria is about 0.4-1 microns, and the diameter of minerals in water such as calcium ions is 400 microns and magnesium ions is 532 microns. Therefore, only water molecules and some minerals can pass through the RO membrane in the source water, while inorganic salts, heavy metal ions, organisms, colloids, microorganisms, etc. cannot pass through the RO membrane.
Ultra pure water equipment utilizes the extremely small pore size of RO membranes to apply great pressure to the incoming source water, separating water molecules and some minerals that can pass through the RO membrane from pollutants. The pollutants are discharged through the wastewater outlet, and the purified ultra pure water is sent to the next stage.

Advantages of SYUP-E biochemical analyzer with ultrapure water machine:

1. The external water source is tap water, which can be directly converted into Class II pure water. It combines reverse osmosis (RO) and UP deionization technologies to further purify the water quality, which is infinitely superior to other products of the same level;
2. Price advantage: This product not only has better effluent quality than most similar products, but also does not increase its product price, making it highly cost-effective;
3. This product uses Dow membrane imported from the United States in the RO membrane unit, which greatly guarantees the quality of the membrane unit. At the same time, it also adds pre-treatment, greatly increasing the product's service life;
4. The system operates without heating, noise, low power, and performance parameters can be set by you, suitable for different water sources as inlet equipment;
5. The system is set to automatically flush within 18 seconds of startup, maximizing the service life of the membrane unit;
6. The equipment runs fully automatically, with only the basic parameters set, and there is basically no need for additional supervision;
7. By using imported resin from the United States, the water quality of the equipment is greatly guaranteed, meeting the water needs of various experiments;

Friendly reminder:

1. The water production capacity of this product refers to the rated water production capacity of the RO membrane at 25 ℃. For every 1 ℃ decrease in water temperature, the water production capacity of the RO membrane decreases by about 3%. When the water temperature drops below 5 ℃, the RO membrane stops producing water. When selecting and ordering, users should consider the factor of the decrease in winter water temperature in the area.
2. If the total dissolved solids (TDS) of the source water is greater than 200ppm, the conductivity of RO pure water may decrease to over 10us/cm; Users with high water quality requirements are recommended to choose a pre installed water softener filtration system.