SYH-VF Laboratory Ultra Pure Water Machine

Infiltration Source SYH-VFUltrapure Water Polishing SystemIt is ahead of most domestic product featuresUltrapure water equipmentIn terms of internal configuration, the device spares no expense in purchasing products from internationally leading manufacturers, analyzing the voltage, control system, monitoring system, etc. required for each product in the infiltration source instrument, and combining these leading components into the current SYH ultra pure water series product, which has become an excellent choice for high-end laboratories.

Parameters of Superpure Water Machine in SYH-F Laboratory

(Water production capacity: It is recommended that customers choose the water outlet model based on a daily calculation of 6 hours)

Infiltration source SHY-FUltrapure Water Polishing SystemEquipment performance:

1.SYH-FUltrapure Water SystemIt is a high-end water production equipment based on ARM7 series microcontrollers and touch as the human-machine interface, and displays the water production process on the screen during the water production process;

2.SYH-FUltrapure Water Polishing SystemThe laboratory ultrapure water preparation system using dual pump and dual membrane manufacturing ensures the conductivity of pure waterStable at 1-5 µ s/cm;

3. Quantitative water intake setting (1-99 liters), leakage alarm function;

4. Low pressure automatic protection function for source water, independent pre flushing function, online monitoring function for water quality conductivity and resistivity

5. Equipped with a 15G liquid level sensing pure water storage system;

6. The imported ultrafiltration membrane from the United States is equipped with an effective heat source, an effective wavelength ultraviolet sterilizer, and dual wavelength ultraviolet digestion instruments at 185nm and 254nm;

7. Imported from Germany, Sedolis terminal microfilter;

8. Pure imported Dow RO reverse osmosis membrane from the United States ensures stable pure water quality and extends the service life of subsequent purification columns and ultra purification columns;

9. The four stage pre-treatment device for source water effectively removes particulate matter, iron, manganese, residual chlorine, calcium, magnesium, adsorbed organic matter, odors, etc;

10. Adopting imported fully enclosed vacuum pressure water storage tanks effectively ensures the quality of pure water, avoiding secondary pollution, UV irradiation, microbial growth, etc. caused by storage;

11. It has automatic prompt and protection for water shortage and low pressure system, and automatic protection for water tank full water system. Also equipped with a drainage outlet to prevent water tank overflow from causing adverse effects on the laboratory when the liquid level sensor is damaged;

12. 18 second automatic flushing of reverse osmosis membrane upon startup, and 18 second automatic flushing of the system upon startup;

Friendly reminder:

1. The water production capacity of this product refers to the rated water production capacity of the RO membrane at 25 ℃. For every 1 ℃ decrease in water temperature, the water production capacity of the RO membrane decreases by about 3%. When the water temperature drops below 5 ℃, the RO membrane stops producing water. When selecting and ordering, users should consider the factor of the decrease in winter water temperature in the area.

2. If the total dissolved solids (TDS) of the source water is greater than 200ppm, the conductivity of RO pure water may decrease to over 10us/cm; Users with high water quality requirements are recommended to choose a pre installed water softener filtration system.

Recommended reading: Detailed explanation of common problems of laboratory ultrapure water machine