Suction machine -15KW

The suction machine uses a vortex air pump to draw air, so that the inlet of the suction nozzle and the entire system are in a certain negative pressure state. The powder particles are sucked into the nozzle along with the external air, forming a material airflow, which passes through the suction pipe to reach the hopper, where gas and material separation is carried out

The suction machine uses a vortex air pump to draw air, so that the inlet of the suction nozzle and the entire system are in a certain negative pressure state. The powder particles are sucked into the nozzle along with the external air, forming a material airflow, which passes through the suction pipe to reach the hopper, where gas and material are separated. The separated materials enter the receiving equipment. Feeding and discharging are achieved through the continuous opening and closing of pneumatic directional valves, which are controlled by the control center.

　　

The suction machine system is widely used in the production process of the powder industry. The vacuum feeding system is easy to install and maintain, and can automatically feed materials for powder production equipment. It is suitable for the renovation and upgrading of traditional old factory production processes and the construction of new factory automation production.

　　

Easy material suction: automatic control, set the suction and discharge time freely within 0-30 seconds, easy and convenient operation;

　　

Suction hygiene: meets GMP standards and CIP requirements; Lightweight: Small in size, light in weight, easy and quick to install;

　　

Quiet suction: no vibration, low noise. Cleaning: dust-free operation, quick and convenient cleaning and material replacement;

　　

Suction economy: One machine can be used alternately on multiple sets of equipment without the need for warm-up or standby, with low maintenance costs;

　　

Energy saving suction: No need for electricity or other energy sources, no heat generation during operation, safe and explosion-proof.

　　

Application site of suction material:

　　

Powdered materials, granular materials, mixed materials, pills, capsules, etc. in the pharmaceutical industry;

　　

Additives, raw materials, candies, candy pills, cocoa powder, flavorings, crystals, etc. in the food industry;

　　

Chemical raw materials, dyes, flammable and explosive materials, as well as toxic and harmful materials, etc;

　　

Transportation of industrial raw materials, waste materials, and other materials;

　　

Transportation of bulk materials in agriculture;

　　

The transportation of small components in the electronics industry (the transportation process will not cause pollution or damage to the materials).

　　

Installation of suction machine

　　

Preparation work before installation

　　

Connect compressed air, power supply, and vacuum source to the equipment accessories. Ensure the cleanliness and purity of compressed air.

　　

Clean the equipment before installation. Dry and sterilize.

　　

Check if the sealing ring is damaged before installation.

　　

Install suction machine

　　

Lift the suction machine as a whole, connect the flange to the receiving equipment, and tighten the screws.

　　

Install vacuum pump

　　

Connect the vacuum tube of the suction machine to the intake pipe of the vacuum pump, and equip it with a pressure relief valve designed by Shanghai Youwei.

　　

Connect to power

　　

Connect the 220V or 380V power supply to the wiring terminals of our electrical control cabinet according to the electrical drawings we provide.

　　

Install valves and pipeline connections

　　

Prepare the components, install the pneumatic butterfly valve or pipeline quick installation, place a sealing ring on each of the left and right sides, and tighten the clamp.

　　

Electrical commissioning

　　

Installation Check

　　

Connect the power supply and confirm the forward and reverse directions of the vacuum source

　　

Loading setting

　　

Our designed touch screen adjusts the loading and unloading time according to the type of material and working conditions. Set the feeding time to 10-30 seconds and the discharging time to 5-20 seconds through the touch screen.

　　

Empty operation

　　

Empty machine operation, according to the visual action process prompted by the touch screen, confirm whether the actual action is correct and whether the connecting pipeline is correct

　　

System action check

　　

Loading: Generate vacuum airflow;

　　

Backblowing: Backblowing airbag works and automatically cleans the filter element

　　

Unloading: When unloading, the unloading door is opened;

　　

Vibration: When unloading, the vibrator vibrates.