Step in constant temperature and humidity test chamber

NegotiableUpdate on 12/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Do you provide customized processing for the walk-in constant temperature and humidity test chamber? Brand: Nanjing Hilbert Model: HS-100~HS-1500 Material: 304 stainless steel Mirror Panel Temperature range: -70-150 (℃) Humidity range: 30% -98% (RH) Studio size: 400 * 450 * 550 (mm) Power supply: 220/380v Applicable range: hospitals, electronics, military industry,

Product Details

Step in constant temperature and humidity test chamberStructural characteristics:

This series of wet heat test chambers is suitable for reliability testing of industrial products under constant and alternating wet heat conditions. The performance indicators of the constant temperature box comply with the requirements of GB5170.18 "Basic Parameter Calibration Method for Environmental Testing Equipment of Electrical and Electronic Products".

Suitable for adaptability testing of electrical, electronic, instrumentation, and other products, components, and materials during storage, transportation, and use in high and low temperature alternating humid and hot environments.

The product complies with GB10592.89 and GB2423.22.87 standards. The product adopts an imported temperature controller for temperature and humidity control, which can be programmed to set multiple parameters. The temperature and humidity are directly displayed digitally, and the operation of the constant temperature box is convenient.

Features of the walk-in constant temperature and humidity test chamber:

1. The refrigeration system adopts imported compressors.

2. Electric heating steam humidification method.

3. Saturated gas humidification method.

4. The studio is made of stainless steel, and the outer box is made of cold-rolled steel plate with electrostatic spraying.

5. The outer box is made using CNC machine tools to ensure accuracy and aesthetic appearance.

6. Each system has security protection functions.

Main technical parameters:

Small (model) Large (model)		HS-50	HS-100	HS-150	HS-225
		HS-408	HS-800	HS-010	HS-015
Small studio size (mm) Large studio size (mm)		300×400×450	400×450×550	500×600×500	500×600×750
		600×800×850	800×1000×1000	1000×1000×1000	1000×1500×1000
Thermostatic box, operating mode		Fixed value operation, program operation
skill technique ginseng number	temperature upper limit	＋100℃/＋150℃/ 200℃
	lower temperature limit	0℃、-10℃、-20℃、－30℃、－40℃、-50℃、-60℃、－70℃、－80℃
	temperature fluctuation	±0.5℃
	Temperature Uniformity	≤2.0℃
	temperature deviation	±2℃
	humidity range	20～98％RH
	humidity deviation	＋2/－3％RH
	warm-up time	35min（20℃～100℃）
	Cooling time	25min（20℃～0℃）、40min（20℃～－20℃）60min（20℃～－40℃）、90min （20℃～－70℃）
Temperature and humidity controller		Imported temperature and humidity controller
temperature sensor		Pt100 platinum resistor
humidity sensor		Pt100 platinum resistance dry wet bulb
refrigeration system	refrigeration unit	Imported fully enclosed French Taikang compressor unit (environmentally friendly)
	Cooling method	Single stage compression refrigeration, binary cascade compression refrigeration
	cooling method	air cooling
heater		Nickel chromium alloy electric heater
Humidification method		Boiler type evaporation
humidifier		Stainless steel heating tube
Dehumidification method		Low temperature dehumidification
circulating fan		axial flow fan
Security protection measures		Overtemperature, overload, overpressure, oil pressure Protection against leakage, water interruption, short circuit, power phase loss, and phase error
material material	housing material	Cold rolled steel plate electrostatic spraying
	Inner wall material	SUS304 stainless steel plate
	thermal insulation material	Ultra fine glass wool
Standard Configuration		One test hole of size 50, two sets of test sample shelves, lighting fixtures, and insulated glass observation windows coated with electric heating film
Optional accessories		Communication interface, remote monitoring computer and software
power supply		380V±10％，50Hz，3P＋N＋G
product standard		GB10586: Technical Conditions for Damp Heat Test Chamber GB10589: Technical Conditions for Low Temperature Test Chamber
Test Method		GB/T2423.1、GB/T2423.3、GB/T2423.9、GJB150.4