High and low temperature impact test chamber

NegotiableUpdate on 12/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Nanjing High and Low Temperature Impact Test Chamber Brand: Nanjing Hilbert Model: SC01, SC02, SC03 Studio Size: 400 * 500 * 500 (mm) Temperature Range: -70 ℃~150 ℃ Temperature fluctuation:; 0.5 (℃) $r $n Temperature uniformity:; 2 ℃ (%) Temperature Control Method: BTC Balanced Temperature Control Range: Climate and Environment

Product Details

High and low temperature impact test chamberProduct Description:

High and low temperature impact test chamber

Brand: Nanjing Hilbert

Model: SC01, SC02, SC03 Studio size: 400 * 500 * 500 (mm)

Temperature range: -70 ℃~150 ℃ (℃) Temperature fluctuation: ± 0.5 (℃)

Temperature uniformity: ± 2 ℃ (%) Temperature control method: BTC balanced temperature regulation

Cold and hot shock test chamber is a testing equipment used in the metal, plastic, rubber, electronics and other material industries to test the structure or composite materials. It can withstand continuous environments of temperature and extremely low temperature in an instant, and can detect chemical changes or physical damage caused by thermal expansion and contraction of the sample in the shortest possible time

1. Applied to adaptability testing of semiconductor devices, electronic products, and other equipment under conditions of rapid changes in ambient atmospheric temperature.

2. Vertical two box structure, automatic control of high and low temperature box circulation process, adjustable dwell and transition time, stainless steel inner tank, multi form recording, equipped with various safety protection measures and devices.

3. Meets MIL-STD-810D method 032, GB2423.22-89Na, GJB1505-86, etc.

高低温冲击试验箱

High and low temperature impact test chamber productsMain technical parameters:

High and low temperature impact test chamber			CTS01		CTS03	CTS05
Studio size (mm)			450×500×500		680×680×650	780×780×850
Basket size (mm)			350×350×300		580×580×500	680×680×700
Dimensions (mm)			2000×1100×1650		2350×1360×2000	2500×1580×2200
skill technique ginseng number	temperature range	high temperature	＋60℃～150℃
		low temperature	－70℃～－10℃
	Temperature preheating upper limit/pre cooling lower limit		＋180℃/－75℃
	Temperature fluctuation/temperature deviation		±0.5℃/±2℃
	Heating time/cooling time		45min（20～150℃）/45min（20～－55℃）
	Temperature recovery time		≤ 5 minutes
Carrying basket load-bearing capacity			10Kg	18Kg		25Kg
Temperature Controller			Imported programmable temperature controller
temperature sensor			Pt100 platinum resistor
refrigeration system	Refrigeration unit/method		Imported German valley wheel semi closed compressor unit/binary cascade compression refrigeration
	cooling method		Water cooling (cooling water pressure: 0.2-0.4MPa, water temperature: ≤ 30 ℃)
	condenser		plate heat exchanger
Heater, cooler			Nickel chromium alloy electric heater, finned cooler
circulating fan			axial flow fan
Pneumatic cylinder			Basket in high and low temperature chamber conversion driver
air compressor			Provide compressed air for driving the cylinder (optional)
Security protection measures			Overtemperature, overload, overvoltage, leakage, short circuit, power phase loss, phase error protection
material	Shell/inner wall/insulation material		Cold rolled steel plate electrostatic spraying/SUS304 stainless steel plate/rigid polyurethane foam or ultra-fine glass wool
Standard Configuration			Test hole, lighting lamp, observation window, insulated glass observation window with electroplated heating film
power supply			380V±10％，50Hz，3P＋N＋G
Meet the test method			GB/T2423.22、GJB150.5、GJB360.7、GJB367.2
Power (Kw)			18.0		25.0	30.0