Steel stamp hot coding machine

Steel stamp hot coding machineAdopting optoelectronic integration technology, it is suitable for surface indentation or colored printing of materials such as paper boxes, labels, hang tags, certificates of conformity, paper, paper bags, plastic bags, thin cardboard and non absorbent materials such as plastic films and aluminum foils. It has the advantages of automatic splitting, automatic counting, arbitrary positioning, pre-set printing times, clear indentation, color selection, fast printing speed, instant printing and drying, and low loss. The manual steel stamp coding machine can achieve dual use, and when using a solid ink wheel, it can achieve the effect of colored printing. If the solid ink wheel is removed, it can produce the effect of indentation printing, and the indentation printing is clear, with a wide range of adaptability to the thickness of the printed object, and clean use can pollute the production environment. It is common for many manufacturers to have a machine that can simultaneously perform two different functions.

Steel stamp hot coding machineworking principle:
Using thermal printing tape instead of ink printing and adopting a special movable type loading and unloading structure, it can be printed on any flexible packaging material. The printing is clear and not easy to erase; The advantage of being hygienic and free from ink pollution is that it is an economical and hygienic printing method.

For standalone use, it is mainly used for printing production date, batch number and other identification on paper bags, paper labels, and non absorbent materials such as plastic film, aluminum foil, etc. It has the characteristics of automatic splitting, automatic positioning of the coding machine, and high-speed printing.

Operation process:

1. Install the printing tape: Install the printing tape on the "tape feeding roller" and wrap it around the tape guide retaining ring ① → tape feeding spring → tape guide

After retaining ring ② → tape guide rod → tape guide retaining ring ③ → belt feeding wheel → belt pressing wheel, use adhesive to stick it to the empty paper tube and install it on the "tape roll"

On the drum, pay attention to the correct installation direction of the printing tape, and tighten it moderately to ensure that the hot printing has sufficient tension after printing,

Not deviating or sticking to the printed material.

2. Printing tape width adjustment: Adjust the axial position of the outer retaining ring of the tape guide to ensure that both retaining rings are 1mm away from the printing tape.

3. Adjust the printing pressure: Adjust the length of the connecting rod to adjust the height of the printing head, and make the printing head press tightly against the printing material when it is in the lowest position. Adjust the pressure pre adjustment screw to ensure clear printing. Loosening the screw reduces the pressure; The pressure of tightening the screw increases.

4. Adjust the travel interval of the conveyor belt: Adjust the conveyor belt travel adjustment screw upwards to make the travel interval of the conveyor belt smaller; Adjust the screw downwards to increase the interval between the forward movement of the conveyor belt.

5. Temperature adjustment: Adjust the temperature knob (TEMPERAURE) according to the packaging material printed by our factory, with temperature scales corresponding to 3-4.

6. Type change: Slightly push the handle of the movable type loading and unloading inward, rotate it 90 °~180 °, detach the hook head and pull out the movable type module, loosen the fixing screws of the movable type, and install the printed movable type (batch number, expiration date) according to the product requirements on the module board.