Standard cage board

(1) Thickness 9 mm, installation diameter 25.4 mm optical element

This cage plate is suitable for installation and Oshish; 25.4mm optical element, thickness 9mm, with SM1 threaded through-hole and 2 SM1R fixed snap rings. The bottom has M4 threaded holes for connecting rods, with 4 cage rod through holes compatible with a 30mm cage system. There is also 1 locking screw on each side, which can be tightened with a 1.5mm hex wrench.

(2) Thickness 9 mm, install SM1 lens sleeve

This cage plate has a thickness of 9 mm and is equipped with RMS threaded through holes, suitable for installing RMS threaded components such as microscope objectives. The bottom has M4 threaded holes for connecting connecting rods, with 4 coaxial rod through holes compatible with a 30mm cage system. There is also 1 locking screw on each side, which can be tightened with a 1.5mm hex wrench.

(3) Thickness 9 mm, RMS internal thread

This cage plate has a thickness of 9 mm and is equipped with RMS threaded through holes, suitable for installing RMS threaded components such as microscope objectives. The bottom has M4 threaded holes for connecting connecting rods, with 4 coaxial rod through holes compatible with a 30mm cage system. There is also 1 locking screw on each side, which can be tightened with a 1.5mm hex wrench.

Rotating cage plate

The Zolix 30mm rotating cage plate can rotate the entire 30mm cage system 360 degrees around the center. Its structure consists of two coaxial plates, one for fixing in free space or a 30 mm cage system, and the other for rotating the coaxial components connected to it. The cage plate is engraved with a 2 ° dividing line, which can be manually positioned, and the rotating part is locked by a flexible clamping method.

·Suitable forØ 25.4mm optical element

·Compatible with 30mm cage systems

·Can enable coaxial components to rotate 360 °

30 mM standard cage plate

Product Description

·Material: 6061-T6 aluminum alloy
·Compatible with 30mm cage system
·Fixed methods: top wire fixation and snap ring fixation

ZOLIX provides a 30mm standard cage plate that is compatible with 30mm cage systems. There are two shapes to choose from: rectangular and circular, all of which are compatible with 30mm cage systems. The thickness of the rectangular cage plate is 4 mm, 9 mm, and 12.5 mm, and the center hole can be selected according to the needs with SM05, SM1, and RMS threads, or with light wall holes with diameters of 25.4mm, 30.5mm, and 32mm. The circular cage plate can be adapted to SM2 internal threads or diameters; The mounting holes for the central optical component in the 50.8mm optical wall are all SM1 threaded holes. There is a locking fixing screw located on the side at each connection hole of the cage rod, which can be used to tighten the cage plate with a 1.5 mm hex wrench.

General Parameters

30mm thin cage plate

·Material: 6061-T6 aluminum alloy
·SM1 threaded through-hole
·Compatible with 30mm cage system

The 30mm thin cage plate provided by ZOLIX has a thickness of only 4mm, and its central mounting hole is an SM1 threaded through-hole, which is compatible with ZOLIX's SM1 optomechanical components. There is no M4 connecting rod mounting hole at the bottom of this cage plate, so it cannot be used in free space and can only be used with a 30mm cage system. There is a locking fixing screw located on the side at each connection hole of the cage rod, which can be used to tighten the cage plate with a 1.5 mm hex wrench.

30mm circular cage plate

·Material: 6061-T6 aluminum alloy
·Optical component fixation method: Double snap ring fixation
·Installation optical component size:Ø 25.4mm
·Can be used interchangeably with 2-inch optomechanical components

The 30mm circular cage plate provided by ZOLIX is suitable for installation and Oslash; 25.4mm optical element, circular coaxial plate with 30mm cage system mounting hole, can be transferred to 2-inch optical mechanical parts or 60mm cage system. The center mounting hole is SM1 thread, and 2 SM1 thread snap rings are included for installing optical elements. The external dimensions include SM2 external thread andØ There are two specifications of 50.8mm light wall, which can be selected according to the usage scenario and requirements. There is a locking fixing screw located on the side at each connection hole of the cage rod, which can be used to tighten the cage plate with a 1.5 mm hex wrench.

30mm cage plate, installing optical components with a diameter of 25.4mm

·Material: 6061-T6 aluminum alloy
·Compatible with 30mm cage system
·The bottom of the cage plate contains M4 threaded holes

The 30mm cage plate provided by ZOLIX is compatible with 30mm cage systems and is used for installing 1-inch optical components. The optical component fixing method of CSP1T-25.4S is to install it through the optical wall hole and fix it with the top wire. CSP1T-25.4AS and CSP1T-25.4A are both fixed with snap rings. CSP1T-25.4AS is fixed with limit steps and a single snap ring, while CSP1T-25.4A is fixed with double snap rings. The snap ring is a complimentary item and has been installed on the cage plate. The bottom of the cage plate has M4 threaded holes for installing connecting rods. There is a locking fixing screw located on the side at each connection hole of the cage rod, which can be used to tighten the cage plate with a 1.5mm hex wrench.