25mm integrated optical connecting rod

25mm integrated optical connecting rod

25mm integrated optical connecting rodProduct Description

·An integrated optical connecting rod with a diameter of 25 mm and a mounting base can be used as a basic support component for optical components

·Made of 303 stainless steel, the surface has good extinction effect after sandblasting and passivation treatment

·There are two series of optional M4 or M6 threaded holes on the top of the optical connecting rod

·The top of the optical connecting rod includes 2 Ø 2mm positioning pin holes, which can be used for precise positioning and installation of optical components

·The optical connecting rod body has a radial center with one Ø 6mm through-hole, which can be used for installing it on products such as breadboards or optical platforms for force locking or disassembly

·The base type design can be flexibly installed and fixed on products such as breadboards or optical platforms with stainless steel fork blocks

·Extension rod length: 12.5mm~300mm optional

The 25mm optical connector with base provided by ZOLIX adopts a solid structure integrated design of 303 stainless steel, which has good strength and rigidity. The surface has been finely sanded and passivated, and has good extinction effect. This type of optical connecting rod is commonly used as the basic support component for optical and mechanical components, and is a widely used basic product in optomechanics. The 25mm optical extension rod with base we provide includes two series of types: top M4 and M6 threaded holes. The length range of the top M4 threaded hole series extension rod is 12.5mm~300mm, and the length range of the top M6 threaded hole series extension rod is 20mm~300mm. Except for SRA25-12.5T4 (M4 through-hole structure with M4 threaded holes at the top and bottom), both series of optical connectors have M6 threaded holes at the bottom. The installation threaded holes at the top and bottom can be used to connect optical components and platform foundations. At the same time, considering that some optical adjustment frames need to maintain a fixed position of the optical axis center relative to the connecting rod, we have designed two Ø 2mm positioning pin holes at the top, which can be used for precise positioning and installation of optical components. The installation of the optical connecting rod and the bread board or optical platform can be connected using the bottom M6 screw hole, and the connecting rod can be locked or disassembled using a radial Ø 6mm through-hole with tools such as an Allen wrench. If you want the optical connecting rod to be installed freely on the bread board or optical platform, it can be used with a stainless steel fork block.

About Zhuo Li Han Guang

As a domestic brand deeply involved in the field of optomechanics, Zhuoli Hanguang has always been deeply involved in precision manufacturing. From precise optical platforms and stable vibration isolation platforms, to precise electric and manual sliding tables, from multi specification displacement tables and adjustment frames, to high-performance vibration isolation equipment and optical flat plates, every product embodies a dedication to technology and a commitment to quality.

In the future, Zhuoli Han Guang will continue to use innovation as the engine, continuously breaking through in cutting-edge fields such as nanodisplacement platforms, low-temperature piezoelectric displacement platforms, and active vibration isolation platforms. With higher quality optical breadboards, electric scanning platforms, air floating vibration isolation platforms and other core equipment, Zhuoli Han Guang will provide solid support for scientific research and industrial development with a full range of high-quality optical products, demonstrating the technical strength and responsibility of domestic brands.