Product Categories

Beijing Zhuoli Han Guang Instrument Co., Ltd

E-mail
lina-he@zolix.com.cn
Phone
13810146393
Address
No. 16 Huanke Middle Road, Jinqiao Industrial Base, Tongzhou Park, Zhongguancun Science and Technology Park, Beijing, Building B, No. 68, Liandong U Valley Pilot Zone

Contact Now

Column lens mounting seat

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ZOLIX offers a variety of column lens mounting brackets, suitable for installing rectangular optical components of various specifications. The height range for installing optical components on the upper and lower sliding arms is between 4 mm and 17 mm. Depending on usage needs, users can replace the accompanying 50 mm extension rod with a longer one to install higher optical components (if the sliding arm overlaps with the coaxial through-hole, the mounting seat cannot be used in cage systems).

Product Details

Overview of Column Lens Installation Seat Products

Zolix 30mm cage systemColumn lens mounting seatColumn lenses and other rectangular optical components can be horizontally or vertically positioned within a 30 mm cage system. The height range for installing optical components on the upper and lower sliding arms within the cage system is between 4 mm and 17 mm. Depending on usage needs, users can replace the accompanying 50 mm extension rod with a longer extension rod (CSSP series extension rod, sold separately) to install higher optical components (if the sliding arm overlaps with the coaxial through-hole, the mounting seat cannot be used in the cage system). There is an SM1 internal threaded hole at the center of the cage plate, which is compatible with 1-inch optical components and SM1 threaded mounting parts. The bottom of the cage plate is equipped with M4 threaded holes for installing connecting rods (note that if the lower boom moves too much downwards, the connecting rod installed may collide with the lower arm). This mounting bracket is paired with our CSP1R-SM1 rotating cage plate, allowing the cylindrical lens to rotate within a 30 mm cage system.

·Rectangular optical component mounting bracket for 30mm cage system

·In the cage system, the height range of optical components installed on the upper and lower sliding arms is between 4 mm and 17 mm

·Coaxial plate center with SM1 threaded hole

·M4 threaded hole on the bottom can be used to install connecting rods

Product Model	Applicable optical component height
CSM1-CL	4~17mm

60mm column lens mounting seat

Product Description

·Material: 6061-T6 aluminum alloy
·Column lenses or rectangular optical elements can be installed in a 60mm cage system
·The center of the cage plate has SM2 threaded holes
·Installation method of optical components: clamp arm fixation
·The sliding arm and cage plate can move independently

ZOLIX column lens mounting bracket is suitable for installing rectangular and semi cylindrical optical components, and is compatible with 60mm cage systems. The main structure includes a 60mm cage plate, upper and lower sliding arms, and two Ø 6mm cage rods, both of which are fixed to the cage rods by two sets of M3 fastening screws. Apply engineering rubber pads on both sides of the pressure arm to enhance the stability of optical component fixation by increasing the contact area. The cage plate and sliding arm support independent movement and locking: when the locking mechanism of the sliding arm is released, the optical element can be translated along the axial direction of the cage rod; The edge of the cage board is equipped with dual level positioning markings (with a main scale spacing of 5mm and a secondary scale spacing of 1mm). Users can adapt large optical components by replacing the Ø 6mm cage rod with a longer specification, but it should be noted that when the component size exceeds the light transmission range of the cage hole, it is only suitable for free space installation.

model	CSM2-CL
material	6061-T6 aluminum alloy
Surface treatment method	Black anodizing
Installation of optical component dimensions	4~47mm
Specification of central threaded hole	SM1 internal thread
Bottom installation threaded hole specification	M4
compatible system	60mm cage system
Marking accuracy	1mm