Stainless steel glass rotor flowmeter

LZB/LZJ seriesStainless steel glass rotor flowmeterApplied in chemical, petroleum, light industry, medicine, environmental protection, food and metrology testing, scientific research and other departments, measuring the flow rate of single-phase non pulsating fluids (liquids or gases).

Stainless steel glass rotor flowmeterIt mainly consists of a conical glass tube that expands from bottom to top and a stainless steel float that moves up and down according to the fluid flow rate. When the fluid flows through the conical tube from bottom to top, the lift S generated by the kinetic energy of the fluid on the stainless steel float and the buoyancy A of the fluid cause the stainless steel float to rise. When the sum of the lift S and buoyancy A is equal to the weight G of the stainless steel float itself, the stainless steel float is in equilibrium and stable at a certain degree position. The scale on the conical tube indicates the flow rate value of the fluid. The flange, float, guide rod, support plate, and bolts of the stainless steel glass rotor flowmeter are all made of stainless steel 304 SKLZB-( )B。 The SKLZB/LZJ series stainless steel glass rotor flowmeter is used in chemical, petroleum, light industry, pharmaceutical, environmental protection, food and metrology testing, scientific research and other departments to measure the flow rate of single-phase non pulsating fluids (liquids or gases).

Manufacturer of glass rotor flowmeter

All stainless steel type

The flange, float, guide rod, support plate, and bolts are all made of stainless steel 304 (1Cr18Ni9Ti), with the model LZB - () B.
If 316 is required for the liquid receiving material, the model is LZB - () Bo and it needs to be customized.
If stainless steel lined with PTFE is required, the model is LZB - () BF (or BoF), which needs to be customized.
Full tetrafluoroethylene type
The base, float, and needle valve are made of polytetrafluoroethylene (PTFE). Support plates, screws, etc. are made of stainless steel