Spot dealer Festo FESTO solenoid valve

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Spot distribution of Festo FESTO solenoid valves, MHA1-2X2/2G-1, 5-3-3-3 type, Festo FESTO pneumatic control valve in stock supply, one penalty of ten $r $n for false supply. German Festo FESTO solenoid valve MHA1-2X2/2G-1, 5-3-3-3 type needs to be installed on a flat surface with screws.

Product Details

Spot dealer Festo FESTO solenoid valve, MHA1-2X2/2G-1, 5-3-3-3 type, Festo FESTO solenoid valve spot supply fake one penalty ten

Spot dealer Festo FESTO solenoid valveMHA1-2X2/2G-1, 5-3-3-3 type technical specifications:

Valve function	2x2/2 normally closed, single electronic control
Drive Type	electrical
width	20 mm
Standard rated flow rate	30 l/min
work pressure	0 . .. 1.5 bar
Reset type	mechanical spring
protection level	IP40
width	20 mm
Maximum interface cable length	30 m
Rated size	1.5 mm
width dimension	20 mm
Exhaust function	Cannot be throttled
Sealing principle	soft
Assembly position	arbitrary
Hand controlled device	push
Lead type	direct
flow direction	irreversible
Free to overlap	is
Signal status display	LED
Work pressure, reversible	-0.95 . .. 0 bar
Suitable for vacuum	is
Standard traffic pmax ->0	30 l/min
Maximum switching frequency	10 Hz
Switch time, close	6 ms
Switch time, open	6 ms
Continuous power on rate	100%
Characteristic parameters of the coil	24 V DC: Low current phase 0.7 W, high current phase 3 W
Allowable pressure fluctuations	+/- 10 %
working medium	Compressed air complies with ISO8573-1:2010 [7:4:4]
Explanation on Work and Lead Medium	Lubricated compressed air can be used (once used, lubricated compressed air is required to be used continuously)
CE symbol (see applicable standards)	According to the EU-EMV guidelines
seismic resistance	Transport application testing, strength level 2, compliant with FN 942017-4 and EN 60068-2-6 standards
impact resistance	Impact test, strength level 2, in compliance with FN 942017-5 and EN 60068-2-27
Corrosion resistance grade CRC	2- Moderate corrosion impact
Storage temperature	-20 . .. 60 °C
medium temperature	-5 . .. 50 °C
ambient temperature	-5 . .. 50 °C
Product weight	30.6 g
electrical connection	Plug KMH
Installation Type	With through-hole
Pneumatic connection, air port 1	QS-3
Pneumatic interface, 11	QS-3
Pneumatic connection, air port 2	QS-3
Material Remarks	Does not contain brass and PTFE Compliant with RoHS
Material information, sealing	FPM HNBR NBR
Material information, shell	PA - Strengthen PPS - Strengthen
Material information, screws	steel