Festo solenoid valve for specific application scenarios

NegotiableUpdate on 05/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

For specific application scenarios, the Festo solenoid valve MHA1-M1H-2/2G-0,9-PI type and Festo FESTO pneumatic control valve are available in stock, with a penalty of ten $r $n for false supply. The German Festo FESTO solenoid valve MHA1-M1H-2/2G-0,9-PI type directly controls the cone valve $r $n. The micro valve has an external size of 10mm $r $n and a switching time of 4ms

Product Details

Festo solenoid valve for specific application scenarios, MHA1-M1H-2/2G-0.9-PI type, Festo FESTO solenoid valve available in stock

Festo solenoid valve for specific application scenariosThe MHA1-M1H-2/2G-0,9-PI valve is a plate valve suitable for individual or group installation, with an ultra small design and a bottom plug connection (plug-in connection) Directly controlled cone valve
Micro valve: external dimensions 10mm
Switching time up to 4ms

Technical parameters of Festo FESTO solenoid valve MHA1-M1H-2/2G-0, 9-PI type:

Valve function	2/2 normally closed, single electronic control
Drive Type	electrical
width	10 mm
Standard rated flow rate	14 l/min
work pressure	-0.9 . .. 2 bar
design structure	Lift valve with spring reset
Reset type	mechanical spring
protection level	IP40
authorization	c CSA us - Recognized (OL) c UL us - Recognized (OL)
Rated size	0.9 mm
width dimension	10 mm
Exhaust function	Cannot be throttled
Sealing principle	soft
Assembly position	arbitrary
Hand controlled device	push
Lead type	direct
flow direction	irreversible
Identification of valve position	label
Explanation on Forced Power	Switch frequency at least once a week
Suitable for vacuum	is
Maximum switching frequency	20 Hz
Switch time, close	5 ms
Switch time, open	4 ms
Continuous power on rate	100%
power consumption	1 W
The maximum forward test pulse with a logic of 0	500 µs
The maximum negative test pulse with a logic of 1	400 µs
Characteristic parameters of the coil	24 V DC: 1 W
Allowable pressure fluctuations	+/- 10 %
working medium	Compressed air complies with ISO8573-1:2010 [7:4:4]
Explanation on Work and Lead Medium	Lubricated compressed air can be used (once used, lubricated compressed air is required to be used continuously)
seismic resistance	Transport application testing, strength level 2, compliant with FN 942017-4 and EN 60068-2-6 standards
impact resistance	Impact test, strength level 2, in compliance with FN 942017-5 and EN 60068-2-27
Corrosion resistance grade CRC	2- Moderate corrosion impact
Storage temperature	-20 . .. 60 °C
medium temperature	-5 . .. 40 °C
ambient temperature	-5 . .. 40 °C
Product weight	10 g
electrical connection	plug
Installation Type	On the base With through-hole
Pneumatic connection, air port 1	base
Pneumatic connection, air port 2	base
Material Remarks	Does not contain brass and PTFE Compliant with RoHS
Material information, sealing	FPM HNBR NBR
Material information, shell	PA - Strengthen PPS - Strengthen