Spinning machine

NegotiableUpdate on 02/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Spinning machine: Compared with conventional methods, it is now possible to spin fibers with only a small amount of material on laboratory equipment in just a few minutes. Microspinning is particularly suitable when there is only a small amount of material or when expensive additives are used.

Product Details

Spinning machineCompared with conventional methods, it is now possible to spin fibers using only a small amount of material on laboratory equipment in just a few minutes. Microspinning is particularly suitable when there is only a small amount of material or when expensive additives are used.

The stretching/adjusting unit has controlled supply and winding rollers and heating elements to precisely control the fiber stretching speed, stretching ratio, and stretching temperature. This device can be configured to use an independent speed controlled wire guide for hot or cold drawing/stretching of single filaments. The guide wire speed of the hoist can be precisely controlled between 0.5 and 90 m/min.

1Spinning machineTechnical Specifications

Winding unit
Guide roller diameter	75 mm
Winding speed range:	5 - 200m/min
Wire winding spacing	0.1-4.0 mm (increments of 0.1 mm)
Range of winding width	10-150 mm (increments of 1 mm)
Scope of spinning mouth mold	0.25-1.50 mm (increments of 0.25 mm)
Control method	Integrated touch screen control
Dimensions (l x w x h)	67 x 50 x 34 cm3
weight	About 35 kg
electricity	115 or 230 V

Temperature control unit:
Roller diameter	75 mm
2-roll design
speed regulation range	0.5-90 m/min (increments of 0.01 m/min)
Spinning spacing	0.5-90 m/min (increments of 0.01 m/min)
Width adjustment range	10-150 mm (increments of 1 mm)
Range of winding tension	-10-10 N (incremental range 0.05 Nm)
Stretching ratio range	1:10
Hot shoe temperature range	Room temperature -300 ° C (increments of 1 ° C)
Nitrogen purging function
Hot shoe length	300 mm
Control method	Integrated touch screen control
Dimensions (l x w x h)	1723 x 50 x 35 cm
weight	About 75 kg
electricity	115 or 230 Volts

2、 Advantages

The lateral movement speed of the lateral guide rails on the two units is independently controlled to precisely control the spacing and the looseness and tightness of the winding. The pitch between adjacent fibers can be controlled between 0.1 millimeters and 4.0 millimeters. You can use a 75mm paper tube for winding. The fiber heating options for stretching/adjusting units include "hot boots" (heating fibers through radiation) or optionally heating metal cylinders through conductive heating fibers.