-
E-mail
grt_salea@163.com
-
Phone
13792870018
-
Address
Wanke Tiandi, Xinli Street, Dongli District
Product Categories
Glite (Tianjin) Technology Co., Ltd
JTR MDR Jplus+vulcanization testing machine
NegotiableUpdate on 02/04
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
JTR MDR Jplus+: The sulfur analyzer MDR Jplus+uses sealed double cone molds that comply with all relevant ISO, GB, ASTM, DIN, and JIS standards.
Product Details
MDR Jplus has been developed to meet the needs of modern testing laboratories, providing fast and accurate data, making it highly suitable for the production and development of elastic compounds.
1JTR MDR Jplus+Equipment parameters
| International and domestic standards | ISO 6502, ASTM D 5289,DIN 53529 JIS K 6300 |
| Voltage requirements | Single phase 110/220 V, 50/60 Hz |
| Pressure requirements | 0.4 Mpa filtered air |
| Mold configuration | Double cone, closed mold system, sealed |
| sample volume | 3 to 5 cm3 |
| torque range | 200 dNm |
| oscillation frequency | 1.67 Hz |
| Oscillation amplitude | 0.5, 1.0 degrees. (1.0 Optional) |
| temperature range | Environmental temperature+10 to 230 ℃ |
| temperature control | Digital P.I.D. |
| measurement data | Torque, temperature |
| data calculation | Percentage of small value, large value, focus, and solidification point |
| size | 56(w) x 58(D) x 110(H) cm |
| weight | 150 kg |
IIJTR MDR Jplus+Product Description
The MDR Jplus sulfur analyzer adopts a sealed double cone mold that complies with all relevant ISO, GB, ASTM, DIN, and JIS standards.
MDR Jplus+is a reliable, accurate, and easy-to-use rotorless vulcanizing instrument that is highly suitable for routine and standard drive testing of rubber vulcanization.
Pneumatic locking cylinder used for repeated sample sealing.
The lower mode oscillates at a frequency of 1.67 Hz with an amplitude of 0.5 degrees, while the upper mode remains fixed and accurately measures the reaction force torque.
Ø
Durable and field validated torque sensors enable high stability and reliable torque measurement.
The inner cavity capacity of the rotorless double cone mold component is only 2.8cm ³, suitable for fast and accurate temperature control to provide precise and reproducible data in a wide range of testing environments.
Ø
Dynamic calibration is a semi-automatic calibration that uses a torque standard device and follows the CAL program steps.
The dynamic calibration method is performed at the same oscillation frequency and amplitude as the sample measurement.
3、 Software
