Special vortex fan for mixing equipment

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Special vortex fan for mixing equipment, which can provide continuous and stable airflow for the mixing equipment, ensuring uniform mixing of materials during the mixing process and improving the mixing effect. Meanwhile, compared to traditional fans, it operates with less noise and can improve the working environment; Design optimization, low energy consumption, can reduce operating costs; Simple structure, easy maintenance, low failure rate, can extend the service life of mixing equipment; A stable airflow helps reduce clumping or unevenness, thereby improving the quality of the desired product; It can also adapt to different mixing needs and cope with various materials and process conditions.

Product Details

Special vortex fan for mixing equipment

Common power range

There are various options for vortex fans, ranging from low power as low as 0.2KW to high power as high as 25KW. Due to power limitations, a single-phase 220V can provide a power of 2.2KW, while a 380V voltage can support higher power fan operation.

Factors influencing power selection

Scale of mixing equipment

Large mixing equipment usually needs to handle a large amount of materials. To ensure that the materials can be fully mixed, a fan is required to provide a large air volume and pressure. Therefore, high-power vortex fans, such as 10KW or even 25KW, are suitable. The amount of material processed by small mixing equipment is relatively small, and the required air volume and pressure are small. A low-power fan, such as 0.2KW-2.2KW, may meet the demand.

Characteristics of mixed materials

If the density and viscosity of the mixed material are high, and the mixing difficulty is high, a larger airflow is required to drive the material movement. At this time, a high-power vortex fan may be needed to provide sufficient power. For materials with low density and good fluidity, a low-power fan may be sufficient to achieve uniform mixing of the materials.

Mixing process requirements

Some processes that require extremely high mixing uniformity may require continuous, stable, and large airflow, which requires the installation of high-power vortex fans to ensure that the materials can achieve the desired mixing effect within the specified time. For processes with relatively low mixing requirements, low-power fans can also be competent.

Special vortex fan for mixing equipmentProduct Features

high reliabilityWhen the usage situation changes, the machine can still operate safely. Apart from the impeller, there are no other actions and it is almost maintenance free.
Equipped with dual functions of blowing and suctionOne machine can be used for both suction and blowing.
Oil free operationThe output air is clean.
high pressureCompared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans.
Easy to installIf the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are very low, and it can even operate normally without fixing the feet, saving installation costs and installation cycles.
low noiseCompared to other types of fans, the operating noise is lower, and the higher the power, the more obvious it is. It will be displayed above 5.5KW.
Maintenance free useThe consumable parts are only two bearings, which basically do not require maintenance within the warranty period.
Long service lifeMechanical wear is very minimal because there are no other mechanical contact parts except for bearings. As long as it is under normal usage conditions, there will be no problems for 3-5 years.

Component characteristics

Shell materialUsing high-strength die cast aluminum, the same aluminum material as Mercedes Benz wheel rims, it is stronger than ordinary aluminum alloys and has a more lightweight effect compared to iron shell fans.
Motor performance: Taiwan, China motor is adopted, which is a wide frequency, wide voltage motor, such as single-phase 110V/230V, industrial three-phase 220/380/415/660V, etc. The motor frequency can be 45-75HZ frequency modulation, IP55 protection grade, and F insulation grade.
Fan oil sealUsing German MERKEL oil seal, the material is fluororubber, which can withstand temperatures ranging from -25 ℃ to 300 ℃.
fan bearingThe core components use German SKF and Japanese NSK bearings, which can withstand up to 350 degrees Celsius and 4000 revolutions per minute. 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz, lubrication free, maintenance free for 150000 hours, equivalent to continuous operation for 17 years

Instructions for Use and Installation

Before installation, it is necessary to familiarize oneself with the various technical requirements in the manual, check whether the accompanying accessories are complete, and whether various technical documents are complete.

搅拌设备专用漩涡风机