5.5kw vortex air pump

5.5kw vortex air pumpIt has five characteristics: strong suction, high pressure, large air volume, no noise, and maintenance free. Adopting high-tech energy-saving all copper wire winding coil, the casing is made of high-strength aluminum alloy and the motor casing is die cast in one day. The blades have undergone computer balancing correction and high-precision mechanical processing to minimize vibration. When the impeller rotates, it does not come into contact with any components and is lubrication free, ensuring no oil or gas, making it more environmentally friendly and efficient!

5.5kw vortex air pumpParameter conversion:

(1) The air volume Q is the amount of air flowing through the fan per unit time (m3/s, m3/min, m3/h);

(2) When air flows through a fan, the total energy (kg · m) given by the fan to each cubic meter of air is called the total pressure Ht (kg · m/m3) of the fan, which is composed of static pressure Hs and dynamic pressure Hd. That is, Ht=Hs+Hd;

(3) The total effective power of the shaft power P fan during operation, also known as air power;

(4) The efficiency of a fan is the ratio of the remaining power inside the fan after deducting the lost power P on the fan shaft to the power P on the fan shaft.

5.5KW Vortex Air PumpCapable of functions:

1. It has dual functions of blowing and suction, and can be used for both suction and blowing;

2. Running with little or no oil, the output air is clean;

3. Exhaust and supply fans are divided into:; Pneumatic conveying and pipeline conveying;

4. Can be modified to include six major features: thermal insulation, waterproofing, explosion-proof, anti-corrosion, coupling transmission, and belt transmission;

5. The shell is die cast as a whole and uses shockproof mounting feet, so its requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;

6. The fan blades that generate centrifugal force are made of double-sided forward leaning multi blade, molded in one go, with high-quality dynamic balance, extremely low vibration, stable wind force, low noise, and can withstand certain frictional impact forces, with a long service life.

7. The drainage side panel has a built-in side suction port, which, when combined with the fan blades, can generate a large negative pressure suction force, making the self-priming feeding more stable.

High pressure vortex air pumpParameter selection

The main parameters for selecting a vortex air pump include power, air volume and pressure (which need to be calculated with certain requirements), voltage, etc. Due to the widespread use of vortex air pumps, their selection method is the same as that of high-pressure fans. Generally speaking, the following two steps need to be followed: 1. Determine the function of the high-pressure fan used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure fan; If the curve is misread, sometimes the selected product cannot be used; 2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure fan model based on the working curve; As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out. This needs to be done by professional designers or consulted with professional companies.

High pressure vortex air pumpPiping and wiring

When inserting pipes into the air inlet and outlet, please keep the center consistent and do not connect them under forced circumstances. If shock-absorbing joints are used for channel hoses, they can be easily connected and prevent vibration propagation. Please do not directly add the weight of the pipe to the flange of the high-pressure fan

On the surface to prevent deformation. When introducing hot air, please use flexible joints to avoid the influence of thermal expansion. Avoid sudden shrinkage, expansion, or bending that may result in poor fluid efficiency. Precautions

1. Please pay attention to the power supply and whether the voltage is suitable when using.

2. The air source can only be used for operation after 10 minutes of startup.

During normal operation, the power supply fluctuation should not exceed ± 10% of the rated voltage.

4. The air pump should not be exposed to water or sunlight and should be placed in a ventilated and dry place on a horizontal surface.

5. It is strictly prohibited for harmful liquids to enter the pump body.

6. The air pump should not be used near corrosive or explosive materials.

7. The operating environment temperature of the air pump is within -10 ℃ to+40 ℃, and the altitude is above 1000 meters. The parameters will be subject to change.

8. Users should ask professionals to install protective switches and grounding.

9. During user maintenance and inspection of the air pump, the power should be cut off.