- Phone
-
Address
408, Block C, Jingyi Technology Building, No. 9 Dazhongsi East Road, Haidian District, Beijing
Beijing Lanyou Technology Co., Ltd
408, Block C, Jingyi Technology Building, No. 9 Dazhongsi East Road, Haidian District, Beijing
Product Introduction
Since the successful launch of the FASP series fully automatic soil sample preparation system, Lanyou Technology has actively responded to the strong demand of users for efficient and compliant drying equipment. Based on the long-term mature and stable excellent performance of the FASP series products, and after extensive practical operation verification, the RLTD series has been launchedSoil sample rapid low-temperature dryerIntended to provide efficient and compliant soil sample drying tools for various soil sample preparation laboratories.
Can be used for rapid and low-temperature drying of soil, sediment and other samples, with automatic mixing and blending function.
Product Features
The drying temperature is precisely controlled within the range of 35 ± 5 ℃ to avoid loss of sample elements, strictly following relevant national sample preparation specifications and standards;
The drying time has been shortened from 1 week to 1 month to within 2.5 hours, with high efficiency, cleanliness, low temperature, and zero scattering;
Hardware isolation between samples, no risk of cross contamination;
Contact area with the sampleDoes not contain any metal elements to be testedThere is no risk of external pollution;
Real time stirring and mixing throughout the entire drying cycle, the drying components are smooth and easy to clean.
according to the standard
HJ/T 166-2004 Technical Specification for Soil Environmental Monitoring
Technical Regulations for Preparation, Circulation, and Preservation of Soil Samples (Tu Zi [2018] No. 407) issued by China Environmental Monitoring Station
NY/T 395-2012 Technical Specification for Monitoring Soil Environmental Quality in Farmland
DZ/T 0130.4-2006 Quality Management Specification for Geological and Mineral Laboratory Testing
HJ/T 20-1998 Technical Specification for Sampling and Preparation of Industrial Solid Waste
General Provisions for Soil Sample Collection and Preparation in Environmental Nuclear Radiation Monitoring (EJ 428-1989)
Collection and Preparation of Forest Soil Samples for LYT1210-1999
Main technical parameters
Injection module |
Five sample drying positions. |
Drying module |
The area in direct contact with the sample does not contain any metallic elements to be tested. |
drying temperature |
Accurately control the drying temperature to 35 ℃± 5 ℃. |
Control method |
Real time feedback and control of drying temperature through software, with each drying tank independently and accurately temperature controlled. |
application field
Soil environment monitoring
Detailed survey of agricultural land
Soil and Environmental Science Research
Third party testing agency
Site investigation and evaluation
Soil survey