Soil drill, soil sampler

Product Introduction
Product Name: Soil Drill
Usage: Mainly used for collecting hard sediment or land soil in water bodies, widely used in scientific research institutions, universities, various water plants, field experimental stations, etc.

Technical Specifications
Cylinder diameter: 10.8cm (outer diameter); 10.0cm (inner diameter)
Cylinder height: 21cm
Pole length: 1m

operating steps
Step 1: Assemble the cylindrical drill bit and rod to a suitable height based on the actual situation in the survey area;
Step 2: Place the soil drill vertically at the sampling point and use a matching heavy hammer to strike the rod head, allowing the cylindrical drill bit to fully enter the sediment or soil;
Three steps: Lift the rod, and the sediment or soil is lifted together with the rod. Rotate the push rod in the middle to push the sediment or soil out.


Maintenance Method
After use, clean and dry the soil drill, and store it in a dry place for future use.