Welcome Customer !

Membership

Help

Beijing Mengchuang Weiye Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Small radiation protection cover (lightweight louver box)

NegotiableUpdate on 05/07
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Small radiation protection cover (lightweight louver box)

Product Details

MC-XFSZ small radiation protection cover (lightweight louver box)
sketch:

Lightweight louver boxes can prevent direct radiation from the sun on instruments (mostly built-in sensors) and reflected radiation from the ground, protecting the internal instruments from strong winds, rain, snow, and other influences. And its special surface treatment and structural design provide appropriate ventilation for the sensing part of the instrument, which can truly sense changes in environmental factors such as external air temperature and humidity, carbon dioxide, etc. The lightweight louver box (radiation shield) fully complies with WMO standards. The standard for large radiation shielding covers consists of 9 layers, with 1, 2, and 9 layers being solid and the other layers being hollow; The standard for small radiation protection covers is 19 layers, with 1 and 2 layers being solid and the rest being hollow with bent plates.

Product advantages: 1) It can effectively block ultraviolet radiation under natural conditions; 2) Prevent rapid aging of instruments and meters in harsh outdoor conditions; 3) Can reduce measurement errors caused by strong light; 4) Small size, light weight, and easy installation.


Basic principle:

Lightweight louver box (radiation proof cover), when in use, the temperature inside the cover is uniform and consistent with the outside air temperature, completely enclosing the sensor and blocking radiation heat and precipitation. Use insulation materials through natural ventilation. Its upper plate is in the shape of an umbrella, with multiple layers of rings in the middle. The lower plate is an anti radiation plate, and the sensor is placed in the middle of the cover. When installing the temperature and humidity sensor inside the cover, it is necessary to prevent the bulb of the thermometer from being directly irradiated by the sun. The anti radiation sensor is in contact with the airflow flowing on both sides, so that the temperature and humidity inside the cover can be extremely close to the temperature and humidity of the outside air.