Sludge moisture detector

NegotiableUpdate on 01/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

In the past, the determination of sludge moisture content was generally based on the traditional weight method, which calculated the moisture content of sludge from the ratio of the weight of the dried sludge to the original weight of the sludge. Although this method is accurate, it is particularly time-consuming and cannot truly meet the efficient operation requirements of sewage treatment plants. The Boshi sludge moisture detector uses efficient halogen lamps to heat and determine the moisture and solid content of sludge, which is fast and time-saving. The results are consistent with the oven method, but the efficiency far exceeds that of the oven method.

Product Details

Sludge moisture detector

Product Introduction

BOS seriesSludge moisture detectorIt is based on the electronic balance and equipped with high-precision weighing sensors and high-efficiency halogen lamp heating devices to achieve fast and accurate moisture determination. The halogen moisture analyzer is a reliable solution for measuring the moisture content of your product. This durable and affordable moisture analyzer benefits from Bosch's rich experience in precision instrument manufacturing and years of expertise in moisture measurement.

Widely used for rapid determination of moisture and solid content in municipal sludge, pipeline sludge, river and lake sludge, industrial sludge, dehydrated sludge, domestic sludge, concentrated sludge, sludge, soil, sewage, sludge, mud cake, oily sludge, activated sludge, humus sludge, concentrated sludge and other samples.

Working Principle:

The traditional method for determining sludge moisture is usually through oven drying. Testing a sludge sample takes two to three or even three to four hours, and it also requires weighing on a balance and manual calculation to obtain the moisture value (moisture content) of the sample. Although the oven method for moisture determination is accurate, its low efficiency cannot meet the fast-paced production needs of enterprises. The BOS series halogen moisture analyzer is a newly developed rapid moisture analyzer by Xiamen Boshi Testing Equipment Co., Ltd. It uses a high-power drying heater - circular halogen lamp to quickly and uniformly heat sewage and sludge samples, and the moisture content of the samples is continuously dried. Throughout the measurement process, the instrument automatically displays the measurement results in real-time, including sample weight, moisture content, solid content, measurement time, heating temperature, etc.

The BOS series rapid moisture analyzer applies the principle of oven drying method, and the measurement results have good consistency with the oven method moisture measurement, but the work efficiency is much higher than that of the oven method moisture measurement. Using the BOS series rapid moisture analyzer, it usually takes only a few minutes to measure the sample, so it has been favored and praised by a large number of users.

Product Highlights

·High performance electromagnetic force sensor, with a readability of up to 0.1 mg, provides excellent measurement performance.

·The quick operation and intuitive user interface enable users to quickly familiarize themselves with the operation process of the instrument and start the drying method with one click.

·Rapid analysis and excellent halogen lamp technology are key to ensuring rapid heating and precise temperature control. The final measurement result is obtained in the shortest possible time.

·Always maintain accurate moisture results

·Moisture determination during plastic processing

*Optional USB interface

*Optional thermal printer

Main technical parameters of BOS series rapid moisture analyzer:

model		B0S-170A
range(g)		120-0.005
Readability of weighing (g)		0.005
Repeatability (standard deviation)	>2g	±0.05%
	>10g	±0.01%
Operating temperature range (℃)		13~25
calibration method		Temperature calibration, internal weight calibration
Scale pan size (mm)		Φ90
Dimensions (length * width * height) (mm)		310205200
Power on preheating (minutes)		20-30
Baud rate		300, 600, 1200, 2400, 4800, 9600
monitor		LCD display
Heating temperature range (℃)		40-200
Drying Procedure		Standard heating, step heating, and weight loss heating modes
Humidity display mode		relative humidity
shutdown method		Automatic shutdown, manual shutdown, timed shutdown
Set time		0-99 minutes with a 1-minute interval