Slope method anti-skid coefficient tester

DH-2000Slope method anti-skid coefficient tester

This device is based onJC/T1050-2007Classification and Experimental Methods for Anti slip Performance of Ground Stone MaterialsGB/T37798-2019The evaluation of anti-skid performance grade of ceramic tiles is used for type testing of anti-skid performance on the surfaces of escalator and moving sidewalk steps and treads, comb support plates, and floor slabs;The device is made of a material that is not easily twisted600mmwide2000mmA long flat plate is used as a simulated inclined platform, with a longitudinal slope of0⁰to45⁰Adjustable, the servo motor drives the platform to rotate at a specified angular velocity through a screw device, and is controlled by the tester according to0.50Gradually change the angle; Before the experiment, apply lubricant to the test surface and the tread of the test shoe. The tester wearing the installation protection device should maintain an upright posture and walk back and forth on the test platform in the direction of observation with a step size of half a shoe each time. The test platform should start from a horizontal position1⁰/STilt at a certain speed, stop tilting when the tilt angle reaches, record the tilt angle value, and repeat3Next, ensure the angle value.

Main application scope and functions:

Ceramic tile anti slip testing machine is a testing instrument used to measure the anti slip performance of ceramic tiles.

Main technical parameters:

1Size of tile placement rack:2000mm*600mm

2Range of angle adjustment for placement rack:0-45°Adjustable, angle accuracy ±0.2° (starting from a horizontal position) 0—45Continuous rotation between degrees);

3Number of lubricating water nozzles:3a

4Spray flow rate:（6±1）L/min

5Water tank capacity:300mm*400mm*300mm(Length, Width, Height)

6Type of water pump: self-priming centrifugal water pump

7Water replenishment method: tap water replenishment

8Size of sink:2000mm*600mm

9Material of sink: stainless steel

10Size of electrical control cabinet:200mm*300mm*150mm(Length, Width, Height)

11Equipment weight: approximately130kilogram

4Main configuration:

host1The platform,Test stand1Platform, water tank1Platform, water replenishment pump1Platform, nozzle1Set, water tray1Set,

Electrical Control Cabinet1Platform, safety handrail1Set, Barefoot Test Standard Plate3Block, Shoe Test Standard Board3The block,

Anti slip test shoes1double