Single pole sliding contact wire collector

After the installation of the single pole sliding contact wire collector, it is important to confirm the layout of the system, including the overall layout of the system (usually horizontal layout), as well as the number and position of expansion components.

JDC-700ASingle pole sliding contact wire collectorThe sliding contact wire collector of Yangzhou Tianxiang Electric Co., Ltd. is the main device for picking up electrical energy on the collecting side of the sliding contact wire system. It directly conducts electrical energy to the electrical appliances through the sliding contact between the collecting brush and the guide rail, thereby realizing the mobile power supply of the system.

The current collector consists of two parts: a mechanical tension device and a current collector brush that directly slides in contact with the guide rail. The safety sliding contact wire products currently used are designed very reasonably, making maintenance relatively convenient. Next, we need to pay attention to their safety and reliability in practical use. In view of this, safety sliding contact wires are used in metallurgy, electricity or freight yards, chemical and papermaking, lifting or poor environmental conditions.

JDC-700ASingle pole sliding contact wire collectorThe installation of Tianxiang Electric collector in Yangzhou City determines the length of the traction device (universal type) based on the number of poles and installation space of the collector; Please refer to the collector section of this chapter for the installation height dimensions of JDT type collectors. JDS type collectors are usually installed on the collector crossbar to maintain a horizontal position. After installation, loosen the limit nut and remove the limit plate to allow the current collector to move up and down freely. Wire connection: The connection between the guide rail and the conductive plate should be polished with sandpaper to remove the chloride layer and wiped clean; Apply a layer of conductive paste with a thickness of about 0.2mm to reduce contact resistance.

MH type box type gantry crane procurement and ordering: The box type gantry crane is a semi customized machinery, and the track size and other parameters need to be determined according to your site conditions and needs. When placing an order or signing a contract, users must clearly describe the basic parameters of the purchased box mounted gantry crane (rated lifting capacity, lifting height, span, etc.) in order to provide gantry crane products that meet the requirements and working conditions. If the above information is unclear or you do not understand how to measure, you can contact us. Before and after purchase and installation, our factory technicians will accompany you throughout the process and provide suitable solutions based on your specific situation.