I-beam cable conductor pulley factory

The manufacturer of the I-beam cable conducting pulley consists of three parts: the traction pulley, the cable pulley, and the terminal pulley. The traction pulley follows the mobile mechanical cable (traction) device, and each mobile machinery is equipped with one, which runs back and forth with the mobile machinery. The middle cable pulley suspends the cable within the range of the I-beam track and moves with the traction pulley. Both ends are equipped with buffer impact heads, and the number of pulleys depends on the length of movement.

I-beam cable conductor pulley factoryThe I-beam pulley consists of three parts: the traction pulley, the cable pulley, and the terminal pulley. The traction pulley follows the mobile mechanical cable (traction) device, and each mobile machinery is equipped with one, which runs back and forth with the mobile machinery.

The middle cable pulley suspends the cable within the range of the I-beam track and moves with the traction pulley. Both ends are equipped with buffer impact heads, and the number of pulleys depends on the length of movement. The terminal pulley is fixed at the end of the I-beam guide rail, usually one for each mobile machine. This series of pulleys is divided into five models: I, II, III, IV, and V. If the user uses 12 #, 14 #, 16 # or larger I-beams, it can be specified when ordering. Yangzhou Tianxiang Electric Co., Ltd. can provide complete sets of supply.

I-beam cable conductor pulley factoryCable pulleys are divided into medium load type, heavy load type, and light load type. Therefore, the pulleys of the pulleys are three types: Ø 80, Ø 63, and Ø 50, with a bearing capacity of ≤ 50-150kg. Each type is divided into single-layer, double-layer, and three-layer according to the number of pallet layers, and there are three forms in each type. The first end is the cable traction vehicle, the terminal is the fixed hanging bracket, and the middle is the cable pulley (see figure below).

Unless otherwise specified, HXTS and HXTL type sliding wire collectors of Yangzhou Tianxiang Electric Co., Ltd. have the same phase in the same type of sliding wire conduit and can be replaced with each other during installation (provided that the normal operation of the equipment is ensured). Some models of collectors are divided into single brush and double brush. Single brush is used for straight wire conduit, while double brush is suitable for straight wire conduit and curved wire conduit. Double carbon brush collectors should be prioritized for curved wire conduit. I-beam cable pulley is a device that supplies power to crane trolley by suspending and moving cables, and is widely used in various types of lifting machinery. Its basic structure consists of walking wheels, brackets, and pallets, and is powered by synchronous movement of traction frame and pulley. This device is divided according to load capacity. Medium, heavy, and light load types, with a bearing capacity of ≤ 50-150kg. The number of layers of the pallet can be single-layer, double-layer, or three-layer. During installation, it is necessary to adjust parameters such as cable length and traction wire rope to ensure stable operation. It has the characteristics of sturdy structure, flexible movement, safety and reliability, and is suitable for I-beam guide rails of different sizes.