Siemens SITRANS P410 series pressure transmitter

Siemens SITRANS P410 series pressure transmitterParameters can be operated through buttonsHARTInterfacePROFIBUS PASet up interfaces or Foundation fieldbus interfaces. This pressure transmitter has comprehensive functions and can be accurately adjusted according to specific factory requirements. Despite having a large number of setting options, the operation is still very simple.“intrinsically safe”and“flameproof”The type transmitter can also be installed in applications with potential explosion hazards(Zone 1)or(Zone 0)Certified by the European Union and compliant with European standards(ATEX)The transmitter can also be equipped with various remote transmission sealing components for special applications such as high viscosity materials.

SITRANS P410Pressure transmitters come in various models and can be used to measure:

•gauge pressure

•differential pressure

•volumetric flow rate

•mass flow rate

P410Series（7MF403X. ..C41）Pressure measurement

P410Series（7MF443X. ..C41, 7MF453X. ...C41）Differential pressure and flow measurement

Siemens SITRANS P410 series pressure transmitterCan be used in industrial fields with chemical and mechanical loads. The electromagnetic compatibility range is10KHZ ~ 1GHZTherefore, it is suitable for high electromagnetic radiation environments.“intrinsically safe”and“flameproof”The pressure transmitter can also be installed in applications with potential explosion hazards(Zone 1)or(Zone 0)Certified by the European Union and compliant with European standards(ATEX). Used forZone 0andZone 1of“intrinsically safe”The power category of the transmitter is“ia”and“ib”The transmitter can also be equipped with various remote transmission sealing components for special applications such as high viscosity materials. This pressure transmitter can be used through 3 Local operation with a single operation button, or throughHARTInterfacePROFIBUS PAProgramming pressure transmitters through interfaces or Foundation fieldbus interfaces.

Gauge pressure transmitter measures variables: gauge pressure range for corrosive and non corrosive gases, liquids, and vapors (continuously adjustable) withHARTinterfaceP410Transmitter:0.01 bar ~ 160 barRange bandPROFIBUS PAInterface with the Foundation's fieldbusP410Transmitter:1 bar ~ 160 barDifferential pressure and flow transmitters measure variables:•differential pressure•Minor positive or negative pressure•trafficq~PΔp(Matched with orifice plates and other throttling and pressure devices, see“flow meter”Chapter) Range (continuously adjustable) withHARTinterfaceP410Transmitter:1 mbar. ..30 bar（.0145...435 psi）Range bandPROFIBUS PAInterface with the Foundation's fieldbusP410Transmitter:20 mbar . ..30 bar（.29...435 psi）

Advantages:

•Good quality, long lifespan

•Suitable for measuring corrosive and non corrosive gases, liquids, and vapors

•Rich diagnostic and simulation functions•Small consistency error

•Good long-term stability•The liquid receiving components are made of high-grade materials such as stainless steel and Hastelloy

•beltHARTinterfaceP410The range of the transmitter is0.01 bar ~ 160 bar, infinitely adjustable

•beltPROFIBUS PAInterface and Foundation fieldbus interfaceP410The range of the transmitter is1 bar ~ 160 bar

•High measurement accuracy

•By operating the buttons orHARTInterfaceROFIBUS PAInterface or Foundation fieldbus interface for parameter setting