Shimadzu AGS-X series electronic universal testing machine

Shimadzu AGS-X series electronic universal testing machine

Provide practical and economical experimental solutions

Convenient control of stress and strain

Provide real-time automatic adjustment control function to safely determine control parameters for unknown sample data based on measured stress and strain data without the need for preliminary testing. In addition, the automatic adjustment function easily performs strain control and meets the requirements of ISO6892-2009.

Steel: In addition to traditional stress control, there is an increasing need for strain controlled tensile testing. ISO 6892-2009 JIS Z2241-2010

Plastics and resins: The elastic modulus must be measured within a very small strain range in accordance with ISO and JIS standards. ISO 527 ISO 178 JIS K7171

Ceramics: Many samples are damaged at the microscopic level, so precise control is required from the beginning of the experiment.

High precision load sensor obtains accurate S-S curve

The accuracy guarantee range is 1/500~1/1, and the wide load sensor improves the test efficiency, ensuring that almost all tests can be performed without replacing the load sensor or fixture. In addition, 1 millisecond high-speed sampling ensures that no instantaneous changes in intensity are ignored.

Shimadzu AGS-X series electronic universal testing machine

Multi functional workspace

New enhanced features support simpler and more effective testing

Shared connector for tensile and compression tests (20-300kN frame)

The tensile test and compression test use the same connector. This makes it easier to replace the fixture. In addition, when selecting a fixed joint, install a nut on the upper part of the load sensor to safely disconnect from the connection on the testing machine.

Main control panel

Normally, all experiments can be conducted using the TRAPEZIUM LITE X testing method. AGS-X can test samples using the method created by the testing machine.

The main control panel allows for the creation and storage of test conditions, which can be conducted without connecting to a computer. Adjust the position of the crossbeam by rotating the knob. Such as opening and closing automatic fixtures or automatic extensometer buttons. The main control panel can be easily adjusted for angle by rotating.

-The automatic opening and closing arrows of the fixture require separate controllers.