Shanghai Naichuang Rod Single Force Sensor

Shanghai Naichuang Rod Single Force Sensor

Model: FC1G130-R-FX

Instructions for using the balance

1. Measure component information

2. Bridge Road Information

Shanghai Naichuang Rod Single Force Sensor

3. Instructions for using a single force balance

(1) The balance should be preheated for 40 minutes before use;

(2) During use, it should be dust-proof, moisture-proof, oil proof, and avoid severe vibration. It is strictly prohibited to touch the strain gauges;

(3) It is strictly prohibited to strike, and overloading is not allowed without safety verification calculations;

(4) The unit of each output voltage reading in the balance calibration formula is mV/V, Δ ni=ni-ni0 (where ni is the blowing reading and ni0 is the initial reading), i=FX，MY，MZ);

(5) The load unit calculated by the balance calibration formula is kg or kg · m. When converting to N or N · m, it should be multiplied by 9.80665m/s ²;

(6) Supply power according to the rated bridge voltage, otherwise measurement data correction should be carried out;

(7) The formula for calculating the balance load is in an iterative form.

At the same time, Shanghai Naichuang Testing has independently developed cost-effective domestic products, including the FC3D series of domestically produced three component force sensors, the FC3D series of domestically produced six dimensional force sensors, domestically produced three component force measurement platforms, domestically produced underwater force sensors, domestically produced weighing/force sensors, etc., which also provide various customers with multiple options to choose from.