Shanghai Juyi - High Voltage Accelerated Life Testing Machine

Shanghai Juyi - High Voltage Accelerated Life Testing Machine

NameHigh voltage accelerated life testing machine (PCT applicable)

Model: JY-PCT-30

1.performance

1.1 Temperature range:+100 ℃~+132℃

1.2 Humidity range: 100%

1.3 Pressure range: 0.50 Kg~2.00 Kg/cm2 (safe pressure resistance 5 Kg/cm * G)

1.4 Time range: 000 Hr to 999 Hr

1.5 Pressure application time: 0.00 Kg to 2.00 Kg/cm²About 45 minutes

1.6 The operating temperatures are 110 ℃, 120 ℃, 127 ℃, and 132 ℃; (Special order selection for 143 ℃/151 ℃)

Shanghai Juyi - High Voltage Accelerated Life Testing Machine

2. Structure

2.1 Test box size: 30 x 45 cm (∧ * L)

2.2 Overall dimensions: 54 x 67 x 45 cm (W * D * H)

2.3 Inner bucket material:Stainless steel plate material # SUS-316

Inner bucket sample box size: 28cm * 19cm (length * width)

2.4 Outer bucket material:Stainless steel plate material # SUS-304

2.5 Control system:

a. Using Japanese made RKC-CB100 microcomputer to control saturated vapor temperature

b. The time controller adopts LED display

c. Use a pointer to display the pressure gauge

d. Microcomputer P.I.D automatic calculation and control of saturated vapor temperature

e. Manual inlet valve

2.6 Mechanical structure:

a. Circular inner box, stainless steel circular test inner box structure, in compliance with industrial safety container standards, designed to prevent condensation and dripping during testing

b. Circular lining, stainless steel circular lining design, can avoid direct impact of steam latent heat on the test sample

c. Precise design, good air tightness, low water consumption, can run continuously for 200 hours with each addition of water

d. Automatic access control, circular door with automatic temperature and pressure detection, secure access locking control, safety

The door handle design ensures that the test door is protected by back pressure when the pressure inside the box exceeds atmospheric pressure

e. The precision packing design ensures a tighter fit between the door and the box, which is different from traditional extrusion methods and can extend the packing life

f. Critical point limit automatic safety protection, abnormal cause and fault indicator light display

g. Automatic pressure relief port and high pressure alarm device function

3. Other accessory parts

3.1 Test bracket 3-layer stainless steel (2mm * 2mm)

3.2 Teflon coating sample discs, 3 pieces

3.3 Steam blocking plate 1 piece

3.4 Sample tray handle 1

3.5 Three in one calibration sensor set

3.6 Two packs of pollution-free cleaning agents

3.7 Optional Accessories Selection:

a. Pressure signal transmitter

b. Experimental data recorder

4. Power supply system:

4.1 The fluctuation of system power supply shall not exceed ± 10%

4.2 Power Supply: Single phase 220V 15A

5. Environment&Facilities: Allowable working environment temperature of 20 ℃~30 ℃

6. Warranty period: One year (except for damages caused by natural disasters or human factors, our company provides free repairs)

7. Attached files:

7.1 New System Warranty Certificate, Warranty Certificate

7.2 Operation and Maintenance Manual, Circuit Diagram