High Temperature Test Chamber

High Temperature Test Chamber

Technical Specifications:

Model:JY-1000TX

1Performance: Refers to air-cooled at room temperature20 ℃, or water-cooled water temperature at 25 ℃, when unloaded

1. Temperature range: 200℃

2. Control stability: Temperature: ± 0.5 ℃

3. Distribution uniformity: Temperature: ± 1.0 ℃

4. Volatility: Temperature: ± 1.0 ℃

5. Cooling time: Heat up to 20About 0 ℃60 minutes

High Temperature Test Chamber

2、 Structure and Material:

1Inner box size:H1000×W1000×D1000(mm)

2. Outer box size:H2050×W1520×D1470(mm)

3. Inner box material:SUS # 304 mirror stainless steel plate

4. Outer box material:Advanced cold-rolled sheet spray painted paint

5. Insulation layer: high-density hard PU foam adhesive and 24K glass wool

6. Machine tripod: The furnace bottom is equipped with 4 movable wheels and 4 flat water feet

7. Box door:

1) Single door, left door, handle on the right

2) Vacuum glass window:280X350mm

3) Imported LED lighting fixtures are installed inside the box

8. Wind turbine: 60W extended shaft motor with three sets of multi wing wind turbines

9. Heater: finned heat dissipation tube shaped stainless steel electric heater

10Furnace accessories: adjustable layer format1 set, equipped with 1 set of stainless steel storage rack

11. Test hole: 1 ø 50mm hole on the left side of the body, with 1 stainless steel cover attached

12. Control panel

1) 2 illuminated buckle switches

2) 1 temperature controller

3) 1 main power switch

4、 Control system

1. Control method: Balanced Temperature Control System (BTHC) controls SSR with P.I.D to ensure that the heating amount of the system is equal to the heat loss, thus enabling long-term stable operation.

2. Temperature controller:ImportChinese English human-machine interface, data and information screen display, conversation mode, temperature controller, single point and programmable controlChinese and English can be switched freely

1)Resolution: 0.01℃, 0.1%R.H

2) Temperature range: -99.9 ℃ to+200 ℃

3) Number of program segments: 10 sets of programs with 100 memory segments

4) Each segment can set temperature and time simultaneously, and can be run 999 times repeatedly

5) The program has functions such as standby, skip, hold, and slope control during operation

6) Equipped with functions such as timed shutdown and program termination

7) Equipped with scheduled start, stop, and fault notification functions

8) Temperature sensor: PT100

9) Program Run SV Curve Window

10) Group PID setting memory function

11) The main components of each system are equipped with safety detection interface devices. When an abnormal fault occurs, the fault status is immediately displayed on the screen and the power is cut off.

12) It has the function of displaying accumulated running time, which can be used for machine running time and reference.

5、 Safety protection device:

1．plushotsystem：Heating tube dry burning

2．laboratory：（Adjustable over temperature protection）（Test space temperature fuse）（Extreme overheating of air conditioning channel）（Fan motor overheating）（Main power phase sequence and phase loss protection）（earth leakage protection）（Load short-circuit protection）（Main power leakage circuit breaker（Overtemperature protection function

6、 Usage environmentPermissible operating environment: 5-30 ℃

7、 Using power supply:AC380V 50HZ10KW