Shanghai Digital Anchor Pulling Instrument

NegotiableUpdate on 05/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Shanghai Digital Anchor Pulling Instrument is suitable for on-site testing of the anchoring force of various anchor rods, steel bars, and other anchoring bodies. It is a commonly used on-site testing instrument by various quality inspection units.

Product Details

Shanghai Digital Anchor Pulling InstrumentSuitable for on-site testing of anchoring forces of various anchor rods, steel bars, and other anchoring materials, it is a commonly used on-site testing instrument by various quality inspection units.

Shanghai Digital Anchor Pulling InstrumentNotes:

1. The hydraulic oil used is L-HM32 # anti-wear hydraulic oil, and the operating environment is -20 ℃~45 ℃ It is strictly prohibited to use alcohol, glycerin, brake oil, ordinary engine oil, etc. as hydraulic oil;

2. The rated pressure of this tool is 60MPa, and the pressure can reach 80MPa. In addition, to improve the service life of the pressure gauge, it is generally not more than 75% of the pressure during use;

3. The joint parts of the oil pump and oil cylinder of this tool are subjected to high pressure, so it is necessary to protect the joint and avoid damaging it, which may affect the sealing and normal operation; Do not use a wrench to tighten the joint buckle on the rubber hose to prevent it from loosening and causing the hose to leak oil and be scrapped;

4. The oil cylinder and pipeline of the tool should be cleaned regularly with clean kerosene to ensure its normal operation and extend its service life;

5. Be careful not to block dirt on the inlet and outlet of various oil circuits This product comes with a one-year warranty and provides free user guidance.

meet the standard

GB50367-2006 "Code for Design of Concrete Structure Reinforcement"

GB50330-2013 Technical Code for Building Slope Engineering

JGJ120-2012 Technical Specification for Building Foundation Pit Support

CECS22:2005 Technical Specification for Rock and Soil Anchors (Cables)

GB50007-2011 "Code for Design of Building Foundation"

CECS22:99 "Design and Construction Specification for Soil Anchor Rod"

JGJ145-2013 Technical Specification for Post Anchoring of Concrete Structures

Characteristics of Digital Anchor Pulling Instrument:

1. The overload protection structure of * will not damage the hollow jack even if you are overloaded with empty top or pressure, so you can use it with confidence;

2. There are two ways to apply pressure, either standing or squatting It is an upgraded product of traditional drawing machines, which is highly welcomed by users.

including:

1. Choose one (100-500) kN hollow self resetting hydraulic cylinder;

2. One manual pump;

3. One SW-4A intelligent digital pressure gauge;

4. One high-pressure oil pipe;

5. One precision sensor;

6. Connect one cable;

7. One user manual;

8. One warranty card and one certificate of conformity;

9. One portable case.

Optional accessories: Anchors (Ø 6 ～ Ø 32) are used for glass curtain wall testing. The SW-100 anchor rod pull-out tester has the technical parameters shown above;

The accessories mainly include: M6, M8, M10, M10, M12, M14, M16, M18 adapters and 100kN pull rods.

Technical Specifications: