Welcome Customer !

Membership

Help

Jiangsu Chenyuxin Instrument Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Jiangsu Chenyuxin Instrument Co., Ltd

  • E-mail

    jscyxyb@hotmail.com

  • Phone

    17361727761

  • Address

    No. 258 Zhanxi Road, Jiangyin City, Jiangsu Province

Contact Now

Selection of Gas Turbine Flow Meter and Gas Vortex Street Flow Meter for Natural Gas Turbine

NegotiableUpdate on 04/21
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The natural gas turbine flowmeter is a new type of gas flowmeter newly developed by our company, which has excellent low-pressure and high-pressure metering performance, multiple signal output modes, and low sensitivity to fluid disturbances Widely applicable for measuring gases such as natural gas, coal to gas, liquefied gas, and light hydrocarbon gas. Product parameters of gas vortex flowmeter:

Product Details

The natural gas turbine flowmeter is a new type of gas flowmeter newly developed by our company, which has excellent low-pressure and high-pressure metering performance, multiple signal output modes, and low sensitivity to fluid disturbances Widely applicable for measuring gases such as natural gas, coal to gas, liquefied gas, and light hydrocarbon gas.

Product parameters of gas vortex flowmeter:

Nominal pressure: 1.6MPa, 2.5MPa, 4.0MPa, 6.3MPa (customized for pressures higher than this)

Compensation method: Temperature and pressure dual compensation

Output signal: pulse, 4-20mA, RS485

Communication protocol: MODBUS-RTU, HART (customized)

Power supply: external power supply 24VDC DC power supply, battery power supply 3.6V lithium battery

Usage conditions: medium temperature -20 ℃~80 ℃, ambient temperature -30 ℃~60 ℃, relative humidity 5% -90%, atmospheric pressure 86Kpa-16Kpa

Protection level: IP65, IP67

Explosion proof grade: Exd IC T6GB

Medium of use: natural gas, compressed air, nitrogen and other low to medium flow rate gases

Range ratio: 1:10-1:20

Accuracy: 1.0, 1.5

Material: Aluminum alloy, stainless steel

Product standard: G8_T21391-2008

Installation method: Horizontal installation

Detail diagram of gas vortex flowmeter
燃气涡街流量计细节说明图

Flow range of gas vortex flowmeter:

Instrument diameter mml Standard range (m3/h) Extended range (m3/h)
DN20 S 2-20 w 4-40
DN25 S 2.5-25 w 4-40
DN32 S 4-40 w 6-60
DN40 S 5-50 w 6-60
DN50 S1 6-65 w1 5-70
S2 10-100 w2 8-100
DN65
DN80
S 15-200 w 10-200
S1 13-250 w 10-160
S2 20-400 w
DN100 S1 20-400 w 13-250
S2 32-650 w

Introduction to gas vortex flowmeter:

The difference between gas turbine flowmeter and vortex flowmeter in measuring gas