-
E-mail
jscyxyb@hotmail.com
-
Phone
17361727761
-
Address
No. 258 Zhanxi Road, Jiangyin City, Jiangsu Province
Product Categories
Jiangsu Chenyuxin Instrument Co., Ltd
Acetic acid electromagnetic flowmeter Ice acetic acid flowmeter Acid alkali resistant flowmeter Manufacturer model selection table
NegotiableUpdate on 04/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Chenyu CYX-DC series acetic acid electromagnetic flowmeter is mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Including highly corrosive liquids such as acids, alkalis, salts, etc. Chenyuxin electromagnetic flowmeter is more reliable
Product Details
The Chenyu CYX-DC series acetic acid electromagnetic flowmeter is mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Including highly corrosive liquids such as acids, alkalis, salts, etc.
Chenyuxin Electromagnetic Flow Meter · More Reliable
1. CYX-DC glacial acetic acid flowmeter series model selection:
| Product Name: | Intelligent integrated electromagnetic flowmeter |
| Accuracy level: | ± 0.5 ^ (0.5 ‰) |
| Nominal pressure: | 1.6MP（DN10-DN200） |
| 10 MPA（DN250~DN1000）； | |
| 06MPA (DN100 or above); | |
| (Other specifications can be customized) | |
| Installation method: | Flange installation (default); Flange clamping (customized); Clamp quick installation (customized) |
| Electrode type: | 316L electrode (standard); HB/HC alloy electrode (strong acid-base environment) titanium electrode; Electrode support; Tungsten carbide electrode; Platinum electrode |
| Lining material: | Chloroprene rubber (CR); Polytetrafluoroethylene (F4) |
| Polyurethane rubber (PU); Perfluoroethylene propylene (F46) | |
| Range ratio: | 20:01 |
| Work environment: | Sensor 25-180 ° Converter: -10~60 ℃ (customized for temperatures ≥ 80 ℃) |
| Fluid requirements: | Conductive medium (conductivity 25USCM liquid) |
| Product Name: | Plug-in electromagnetic flowmeter |
| Measurement range: | 0-999M3/H |
| Working temperature: | -40°C~120℃ |
| working pressure: | 1.6Mpa，4Mpa，16Mpa |
| Nominal diameter: | DN6-DN2000 |
| Accuracy level: | Level 0.5 |
| Lining material: | Citroen glue, tetraethylene, PO, PTFE, PFA, etc |
| Motor material: | 316L， Hastelloy alloy, lithium electrode, etc |
| Supply voltage: | 24V，220V， Lithium battery power supply is optional |
| Output signal: | 4-20MA485 protocol, HART protocol |
| Applicable medium: | Conductive liquids, various strong acids, strong alkalis, and condensed water |
2. CYX-DC Ice Acetic Acid Flow Meter Lining Selection Table:
| Lining selection | Performance | Maximum medium temperature | scope of application |
| Neoprene rubber | 1: Has excellent elasticity, high tensile strength, and good wear resistance | 80℃ | Water, sewage, weakly abrasive mud, slurry |
| 2: Resistant to corrosion in general low concentration acid, sulfur, and salt media, not resistant to corrosion in oxidizing media | Special orders available at 120 ℃ | ||
| Polyurethane rubber | 1: Has excellent wear resistance | 70℃ | Neutral and strongly worn slurry, coal slurry, and mud |
| 2: Poor acid and alkali corrosion resistance | |||
| Polytetrafluoroethylene (JPEFE) | 1: It can resist almost all chemical media and can withstand various types of hydrochloric acid, sulfuric acid, nitric acid, and aqua regia, as well as concentrated alkali and various organic solvents. Not resistant to corrosion by chlorine trifluoride, high temperature oxygen trifluoride, high flow boiling fluorine, liquid oxygen, and ozone | 100℃ | Strong corrosive media such as concentrated acid and alkali |
| 2: The wear resistance is not as good as that of polyurethane impregnated rubber | Special orders available at 150 ℃ | Sanitary media | |
| 3: The anti negative pressure ability is not as good as chloroprene rubber | |||
| Perfluoroethylene propylene (F46) | 1: Not resistant to smoke, nitric acid, butyl lithium, and other chemical properties are basically the same as polytetrafluoroethylene | 100℃ | Strong corrosive media such as concentrated acid and alkali |
| 2: Higher anti negative pressure ability than polytetrafluoroethylene | Special orders available at 150 ℃ | Sanitary media |
3. CYX-DC glacial acetic acid flowmeter series caliber flow selection:
| Caliber (mm) | Minimum flow rate (m3/h) | Maximum flow rate (m3/h) |
| 10 | 0.0283 | 4.24 |
| 15 | 0.0636 | 9.54 |
| 20 | 0.12 | 16.96 |
| 25 | 0.176 | 26.5 |
| 32 | 0.29 | 43.42 |
| 40 | 0.452 | 67.85 |
| 50 | 0.7 | 106 |
| 65 | 1.19 | 179 |
| 80 | 1.8 | 271 |
| 100 | 2.82 | 424 |
| 125 | 4.41 | 662 |
| 150 | 6.36 | 954 |
| 200 | 11.3 | 1690 |
| 250 | 17.6 | 2650 |
| 300 | 25.4 | 3810 |
| 350 | 34.6 | 5190 |
| 400 | 45.2 | 6780 |
| 450 | 57.2 | 8570 |
| 500 | 77.6 | 10600 |
| 550 | 85.5 | 12800 |
| 600 | 101 | 15200 |
| 700 | 138 | 20700 |
| 800 | 180 | 27100 |
| 900 | 229 | 34300 |
| 1000 | 282 | 42400 |
| 1100 | 342 | 51300 |
| 1200 | 407 | 61000 |
| 1400 | 554.1 | 83121 |
| 1600 | 732.7 | 108566 |
| 1800 | 916 | 137404 |
| 2000 | 1131 | 169635 |
| 2200 | 1368.4 | 205258 |
Similar Product Recommend
