Sanfeng digital height gauge 543-730B is suitable for precision measurement

Sanfeng digital height gauge 543-730B is suitable for precision measurement

Sanfeng digital height gauge 543-730B is suitable for precision measurementProduct Introduction:

1. The new generation ID series that makes measurement operations smoother and of higher quality. Supporting bidirectional serial communication helps improve work efficiency, meet higher precision measurement requirements, and provide various practical functions that make measurement operations smoother.
2. Can achieve higher precision measurement resolution of 0.5 μ m

The resolution of ID-C has been increased from 0.001mm to 0.0005mm. In addition, the resolution can be switched.

*Except for models with ID-C resolution of 0.01mm.

3. Don't miss the calibration opportunity, calibration time prompt function. When the set calibration time is reached, an icon will be displayed on the LCD screen for prompt. Helps with accurate precision management of ID-C.

4. Improve work efficiency with excellent visibility, large screen display, and simulation bar. Adopting a large screen display with clear information at a glance. Equipped with a simulation bar, it is easy to master subtle actions such as tolerance proximity.

5. Set common functions and easily operate three large buttons. The use of three large buttons significantly improves operability. You can also freely set common functions in each button.

6. Improve measurement efficiency and simplify calculation functions. Real time display of the result of multiplying the measurement rod movement by the calculation coefficient. Reduced the hassle of using fixtures for measurement.

7. The measuring tools manufactured by Sanfeng support bidirectional serial communication. Can be connected and linked with PC, greatly improving work efficiency.
ID-C is a measurement tool that supports bidirectional serial communication. It can be easily connected and linked to a PC through USB input tools. In addition to collecting measurement data in the past, it can also control and set the ID-C host, and perform batch operations such as collecting tool information through the PC, greatly improving work efficiency.
To perform bidirectional serial communication, it is necessary to use the connecting wires and measurement data input devices in the options.

The PC used needs to be installed with USB-ITPAK V3.0Clamping sleeve diameter: Φ 8mm

Probe (hard alloy): Thread M2.5 * 0.45 according to the mounting part
Protection level: equivalent to IP42
Power supply method: 1 lithium metal battery CR2032
Battery life: Normal use: about 2.5 years Continuous use: about 2700 hours
Position detection method: Electrostatic capacitance type Absolute linear grid ruler
Temperature range for use: 0 ° C~40 ° C
Storage temperature range: -10 ° C~60 ° C
Alarm display: various setting errors, sensor abnormalities, display overflow
Input/output: Digimatic S1 (bidirectional serial communication)
OPTION measurement data input device:
Measurement data input device IT-020U, item number: 264-020
Measurement data input device USB direct connection input tool USB-ITN-SF, item number: 06AGQ001F

U-WAVE (Non bidirectional serial communication when using U-WAVE, please note)
You can install options such as lifting rods in the U-WAVE-TM/TMB installation state.
Standard U-WAVE-T dedicated connecting wire: Item number 02AZG011
Connection device (for ID-C series 12.7mm type): Item number 02AZF700
U-WAVE-T dedicated connection wire for foot switch: item number 02AZG021

Sending device (U-WAVE-TM)
Buzzer type item number: 264-623
Waterproof and dustproof type, item number: 264-622
Sending device (U-WAVE-TMB)
Buzzer type item number: 264-627
Waterproof and dustproof type, item number: 264-626

Connection line (1m): 06AGL011
Connection line (2m): 06AGL021

U-WAVE-TM/TMB mounting board:

Installation board for ID: 02AZF670

Sanfeng digital height gauge 543-730B is suitable for precision measurementProduct specifications: metric type

public/Imperial system type

Sanfeng Digital Indicator 543-730B Altimeter