Sandblasting test chamber

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The sandblasting test chamber is designed and manufactured based on the technical parameters of the mechanical wear test method standard in Appendix E of the GB4599-2007 standard for automotive filament bulbs, and can perform the sand water mixed spray test specified in the standard

Product Details

Product Usage

◆Sandblasting test chamberStandard for automotive filament bulb headlightsGB4599-2007The AppendixE Mechanical Wear Test MethodStandard technical parametersDesign and manufacture,Can be standardized and regulatedsandWater mixing spray test

equipmentBox hardware configuration

◆ SUS304 stainless steel box material

◆ The box door is equipped with a large glass observation window and a wiper

◆“Pneumatic components such as "Yadeke" and "SNS"

◆Stainless steel frosted pump

◆Sandblasting media: various materials such as alumina, glass pellets, quartz sand, etc

◆Movable sample stage, movable spray gun

control system

◆7 inchesScreen - Color LCD display programmabletouch screen

◆Each functionThe program is completed by inputting from the human-machine interface control screen on the control panel

◆“ABB”、Schneider、“Jiale”Waiting for the execution of electronic components

meet the standard

Appendix E "Mechanical Wear Test Method" of GB 4599-2007 "Automotive Filament Lamp Headlamp" Standard Standard technical parametersDesign and manufacture

Specifications and Technical Parameters

model		SPC-500（B）	SPC-800（B）		SPC-010（B）		SPC-015（B）
Internal shapesizeD×W×H mm		800×800×800	800×1000×1000		1000×1000×1000		1000×1500×1000
performance metrics	Spray gun nozzle diameter	Ø 1.3mm, stainless steel nozzle diameter Ø 3.2mm
	Nozzle pressure and flow index	0.6At MPa, the flow rate is0.24±0.02L/min
	Spray area diameter	1.Distance from nozzleØ 170mm ± 50mm at 380mm ± 10mm
	Sandblasting medium	Aluminum oxide, glass pellets, quartz sand and other materials with particle sizes ranging from0-0.2mm. The ratio is 25g of silica sand per liter of water
	experimenttime	99 hours59divide
	Test piece power socket	configurablepreventwatertypeaviation connectorAC220V 16A
Operation control system	controller	large screen-Color LCD display, programmable microcomputer PID control, SSR output operation
	spray gun	Specially designed spray gun, driven forward and backward by rodless cylinder
	sample stage	Specially designed sample stage, cylinder driven to move left and right
	Experimental sand suspension function	The experimental sand must be in a suspended state before it can be used normally
	Frosted pump	SUS304 material frosted pump, lifting suspended mixed sand into the sand storage tank
	Sand storage bucket	Easy for the spray gun to absorb mixed sand and spray it out
	power supply voltage	AC220V±10％ 50Hz
	Total power	1.0KW	1.5KW	2.0KW		2.5KW
safety protection		Leakage, short circuit, overheating, motor overheating, overcurrent protection
This technical information is subject to any changesexcusenoFurther notice