Salt spray comprehensive testing box for contact network components

NegotiableUpdate on 01/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The salt spray comprehensive testing box for contact network components is a testing equipment used to simulate composite environmental conditions such as salt spray, humidity, and dryness. It is mainly used to test the corrosion resistance of electronic components, automotive parts, metal materials, and other products to complex environments. ‌

Product Details

Salt spray comprehensive testing box for contact network componentspurpose

The salt water spray tester is used to test the corrosion resistance of the products after the surface of various materials has undergone corrosion treatment such as electroplating, anodizing, spraying, and antirust oilSalt water spray tester can GB-T2423.18-2000、GB-T6461-2002、ASTM.B117-2009、JIS H8502、IEC 60068-2-11-1981 Developing corrosion resistance for metal components and coatings

Sex.

2) Main components/functional requirements of the equipment

The saline spray tester is mainly composed of power distribution control cabinet, heating system, water make-up system, drainage system, spray system, air supply system, mist exhaust system, electrical control system, safety protection device, etc.

3) Main technical parameters

Temperature range of test chamber: 0 ℃ -70 ℃

Meet the standards: GB-T2423.18-2000、GB-T6461-2002、ASTM.B117-2009、TIS H8502、IEC 60068-2-11-1981

Nominal internal volume 800L 接触网部件盐雾综合测试箱

The reference size of the inner box is 1600x500x1000mm (length * width * height)

Power supply conditions and AC 380V three-phase R, S, T, N+protective grounding; The allowable voltage fluctuation range is 10% V;

The allowable frequency fluctuation range is 50 ± 0.5HZ; TN-S power supply or TT power supply

The grounding resistance of the protective grounding wire is less than 4 Ω

Require users to configure corresponding capacity air or power switches for the equipment at the installation site, and this switch must independently control the use of the equipment

Salt spray comprehensive testing box for contact network componentsperformance metrics

The values measured under the environmental conditions of+25 ℃, relative humidity ≤ 85%, and no sample in the test chamber.

Laboratory temperature: Saltwater test method (NSS CASS) 35 ℃± 1 ℃/Corrosion resistance test method (CASS) 50 ℃± 1 ℃

Pressure bucket temperature: Salt water test method (NSS CASS) 47 ℃± 1 ℃/Corrosion resistance test method (CASS) 63 ℃± 1 ℃

Salt water temperature: 35 ℃± 1 ℃, 50 ℃± 1 ℃

Laboratory capacity: 800L

Salt water tank capacity: 40L

Salt water concentration: Add 0.26 grams of copper chloride per liter to a concentration of 5% sodium chloride solution or 5% sodium chloride solution

Compressed air pressure: 1.00 ± 0.01kgf/cm2

Spray volume: 1.0~2.0ml/80 c ㎡/h

Laboratory relative humidity: above 85%

PH value: 6.5-7.2, 3.0-3.2

Spray mode: continuous spray