SYUP-I Biochemical Laboratory Ultra Pure Water Machine

The SYUP-I biochemical laboratory ultrapure water machine is an ideal choice for biochemical laboratories. There are a total of 6 models of this product, and the functions of each model are not significantly different. The biggest difference is a variation in the amount of water produced. The water intake speed of SYUP-I-150L water tank is higher than other models of products, making it very suitable for biochemical laboratories with high water demand.

The importance of water quality in biochemical experiments:

1. Water is a very high-quality carrier and excellent solvent, easy to produce without complexity, and non-toxic and pollution-free;
2. Water can directly participate in laboratory reactions, and the purer the water source, the less impact it has on the experiment;
3. Water has good thermal conductivity and excellent balanced thermal conductivity;
4. Water can become a high-quality additive, and deionized water is generally used as an additive in reagents;
5. Water can be used for daily cleaning of utensils, cleaning of instrument colorimetric systems, reconstitution of calibration samples, reconstitution of quality control samples, preparation of reagents, etc;
6. The water used in the laboratory must comply with the standard GB/T 6682-2008 before it can be used for experiments;

SYUP-I Biochemical Laboratory Ultra Pure Water Machine Equipment Performance:

1. The water quality pretreatment stage adopts four levels of pretreatment, which can effectively remove electrolytes, particles, organic matter, and microorganisms from the water;
2. The resin ion exchange method greatly removes cations such as Ca, Ma, Na, K, as well as anions such as SO4, CL, NO from water quality;
3. The system unit can simultaneously monitor and display values such as RO pure water conductivity and ultra pure water resistivity online, providing convenience for recording experimental data parameters;
4. The quantitative water intake function can be set (0.1- maximum equipment value), and the timed water intake function can be set (1-999min);
5. The fully automated unmanned function will automatically shut down the system for protection in case of water shortage or interruption. When the water pressure returns to normal, the system will automatically resume the water production state; The system has reminders for various operating states, which can facilitate you to pay attention to the status of the water machine during busy work;
6. The UV lamp unit can emit ultraviolet light with wavelengths of 185mm and 254mm. 185mm can rapidly oxidize and decompose residual organic matter in water into carbon dioxide and water; 245mm can destroy DNA in bacterial cells and remove 99% of bacterial cells from water;

Friendly reminder:

1. The water production capacity of this product refers to the rated water production capacity of the RO membrane at 25 ℃. For every 1 ℃ decrease in water temperature, the water production capacity of the RO membrane decreases by about 3%. When the water temperature drops below 5 ℃, the RO membrane stops producing water. When selecting and ordering, users should consider the factor of the decrease in winter water temperature in the area.
2. If the total dissolved solids (TDS) of the source water is greater than 200ppm, the conductivity of RO pure water may decrease to over 10us/cm; Users with high water quality requirements are recommended to choose a pre installed water softener filtration system.