SDW-2801A Cone Penetration Tester

SDW-2801A Cone Penetration Tester Product Introduction:

SDW-2801A Cone Penetration TesterAccording to the standards of the People's Republic of ChinaDesigned and manufactured in accordance with the technical requirements and relevant regulations of GB/T269 "Determination of Cone Penetration of Lubricating Greases and Stone Greases".

Main technical performance characteristics:

● meet the standard：GB/T 269 ASTM D217 ASTM D1403

● Using a digital display to show the cone penetration value, it is intuitive and eye-catching.

● Cone entry timing control device digital display.

The chassis is equipped with fine tuned foot screws, and the surface is embedded with leveling round water bubbles. By adjusting the foot screws, it is easy to adjust the level of the base table

● It has the functions of coarse and fine adjustment of the lifting frame, easy adjustment, and accurate needle alignment.

● Measurement range:0～700 cone penetration degree;

● Cone entry timing control device:Time can be set according to one's own needs, with a time error of less than ± 0.1 seconds;

● divide distinguish rate： 0.01mm；

● Cone insertion accuracy: ± 1 cone penetration;

● The experiment time can be set arbitrarily

● The needle bar component can be adjusted by the knobAdjust up and down within 0-70mm

● Standard cone: 102.5±0.05g,Sample box diameter 100mm, height ≥ 65Complies with the specifications of the national standard GB/T269;

● Lifting bracket: Coarse and fine adjustment dual lifting adjustment mechanismEasy to align the needle tip with the plane of the sample;

● its It: Equipped with a cold light source for easy use and operation.

● Working power supply: 80w

● Instrument size: 325*220*510mm weight ：7.4kg

● Packaging size: 460*350*550mm weight ：12.3kg

● Working power supply: AC220V 50HZ；

Beijing Stawo Technology Co., LtdWe provide the following quality assurance for the instruments sold to you:

----The provided instrument materials are brand new, meet national quality standards, and have a manufacturer's certificate of conformity;

----The materials and main components provided meet the technical requirements specified in the technical documentation;

----The overall quality assurance period of the equipment is one year (excluding normal wear and tear of vulnerable parts).

----We are responsible for free maintenance of any instrument quality issues that occur during the warranty period. Due to equipment malfunction caused by the user's responsibility, we are responsible for repairing and charging reasonable fees.

----Lifetime discounted supply of parts for equipment, and lifetime maintenance and repair of the entire machine.

----After the expiration of the warranty period, if the user needs maintenance and technical services, we will only charge a cost fee.

Packing list: