SAUTER electric actuator AVF124F130

European importSAUTERElectric ActuatorAVF124F130 ×

SAUTER AVF124F130It is a valve actuator with a spring reset function, and its core feature is that it is driven to a safe position (normally closed) by a spring when power is lost, ensuring system safety.

This actuator is mainly used to driveDN15toDN50ofSAUTER VAN/BUNTheVUD/BUDandVIEW/BUESeries straight through valve or three-way valve. It works by receiving three-point switch signals from the controller.

The following is a detailed analysis of its core parameters:

Technical data

|parameter category|Detailed Specifications|

| :--- | :--- |

|Electrical parameters| |

|power supply| 230 V~， ±15%，50/60 Hz |

|power consumption| 4 W，7.6 VA |

|performance parameters| |

|Action force| 500 N |

|itinerary| 0...8 mm |

|Motor operating time|switchable(60or120 second) |

|Spring reset time| 18 s (±10%) |

|response time| 200 ms |

|Environment and Media| |

|ambient temperature| 5...60°C |

|medium temperature|highest100 °C |

|ambient humidity| < 95% r.h., without condensation|

|physical parameters| |

|weight|about2.4 kg |

|Protection level| IP 54 (EN 60529) |

|protection level| II (IEC 60730) |

|Shell material|Flame retardant plastic, black base, transparent top cover|

|Gearbox material|Die cast zinc|

Product Model Overview

The reset function of this model of actuator determines the safe state of the valve in the event of power loss or no control signal.

|model|reset function|Corresponding valve status|

| :--- | :--- | :--- |

| AVF124F130 |Retract actuator push rod|normally closed(Normally Closed, NC)When power is lost, the valve closes|

| AVF124F230 |The actuator push rod extends|Normally Open(Normally Open, NO)When power is lost, the valve opens|

working principle

1. Normal adjustment: When giving the terminal`1-2a`or`1-2b`When powered, the stepper motor drives the push rod to move, driving the valve core to achieve opening adjustment.

2. Overload protection: When the push rod reaches the mechanical limit (valve fully open or fully closed) or encounters jamming, the integrated electronic force dependent shut-off function will immediately cut off the motor power supply to prevent damage to the actuator or valve. This series of actuators does not rely on traditional mechanical limit switches.

3. Spring reset: When the power supply fails or is connected to the terminal`21`When the monitoring contact on is activated, the internal spring mechanism will quickly drive the actuator to the predetermined safe end position (forAVF124F130The valve is closed, and the reset process is dampened to avoid pressure shock.

Settings and Instructions

-greenLEDIndicator light: When`2a`or`2b`The terminal lights up when it receives a control signal. When the actuator reaches the limit and the signal persists,LEDWill make an appointment2.5 Blinking at intervals of seconds.

-yellowLEDIndicator light: Indicates the status of safety functions. Always on during normal operation; When the safety reset is triggered (terminal)21 Extinguish when power is lost; When the terminal21 Restore power supply, yellowLEDIt will flicker about40 During this period, the safety reset function is locked to ensure that the actuator has enough time to reach the end position.

-Encoding switch: used to switch the running time of the motor（60Second or120Seconds).

Engineering and Installation Instructions

1. Installation direction: The actuator can be installed at any position from vertical to horizontal, but cannot be installed upside down.

2. Installation protection: During installation, make sure that condensation or dripping water does not enter the interior of the actuator along the valve stem.

3. Outdoor installation: If installed outdoors, it is recommended to provide a protective cover for the actuator to avoid direct exposure to harsh weather conditions.

4. Wiring instructions:

-terminal`1`For the public end（N）, Terminal`2a`and`2b`Control the actuator to move in two directions separately.

-Connect the safety circuit to the terminal`21`Up there.

-The maximum allowable wire diameter is1.5 mm²， The inlet isM20×1.5 thread.

Optional accessories

|Attachment model|description|

| :--- | :--- |

| 0370881001 |Auxiliary conversion contact (single channel)|

| 0370882001 |Auxiliary conversion contact (single channel), integrated2000 Ω, 1 W; 24 Vpotentiometer|

| 0370882006 |Auxiliary conversion contact (single channel), integrated1000 Ω, 1 W; 24 Vpotentiometer|

| 0370883001 |Potentiometer,2000 Ω, 1 W; 24 V |

| 0370883006 |Potentiometer,1000 Ω, 1 W; 24 V |

| 0372249001 |Intermediate connector, used for medium temperature>100°CThe occasion|

| 0372460001 | M20×1.5 Cable joint, including locking nut and sealing ring|

SAUTER electric actuator AVF124F130

Shanghai Zhuming Advantage Brands:

Shanghai Zhuming Advantage Model：

SauterElectric ActuatorAVP142F001

SauterElectric ActuatorVUL020F300+AXM217F20

SauterElectric Actuator105500

SauterElectric ActuatorTorsten cooler Dipl. - No. Planning and Sales Components Phone: +49 (5132) 5066-16 Mob: +49 (160) 3677552 Fax: +49 (5132) 5066-30 Mail: torsten.kuehl@de.sauter-bc.com

SauterElectric ActuatorDSF158F001

SauterElectric ActuatorDSB 158F001C1306 ,MAX 60 bar

SauterElectric ActuatorRAK8243728 TEMP SW RAK 82.4/3728M

SauterElectric Actuator08186B5DB0

SauterElectric ActuatorID:067 627

SauterElectric ActuatorRWDR 35*42*5-FU

SauterElectric Actuator149022

SauterElectric Actuator149822

SauterElectric ActuatorSAUP086602

SauterElectric ActuatorSAUP086603

SauterElectric ActuatorSAUP087776

SauterElectric ActuatorAVM321SF132

SauterElectric ActuatorRange:0~25BAR DSB158 F931 10(4)250V~ max.60bar TUV DWEFS(SDBFS)00-332 0322 -20T70 IP65

SauterElectric ActuatorDSB158 F931 10(4)250V~ max.60bar TUV DWEFS(SDBFS)00-332 0322 -20T70 IP65 Range:0~25BAR

SauterElectric Actuatorident. Nr:705500 s—Nr:0816287449

SauterElectric Actuator1201704037

SauterElectric ActuatorDSF146F001

SauterElectric ActuatorDSA146F002

SauterElectric ActuatorFH20K

SauterElectric ActuatorEGT347F031

SauterElectric ActuatorTyp0.5.320.025 ID 067344

SauterElectric ActuatorA44W1F001 D1444

About Zhuming Automation：

Shanghai Zhuiming Automation Technology Co., LtdShanghai Dreamingautotech Ltd. was founded in 2011 and is a professional supplier of imported industrial equipment and components. The company adheres to the service concept of "customer-centric", respects customer needs, provides professional technical support and flexible and effective supply chain management to ensure that customers receive high-quality products and services.

At the bottomShanghai Zhuming has procurement facilities in GermanyofficeDirectly purchase from EU factories and enjoy local discounts in Europe;

At the bottomProcessing consolidated orders at the source in Germany, centralized procurement and warehousing, German export customs clearance, significantly reducing additional fees such as customs clearance and operation fees;

At the bottomWeekly flights guarantee delivery time, and expedited shipments can also be used International express delivery services such as DHL and UPS;

At the bottomThe product is guaranteed to be imported from the original factory, and free original shipping and customs declaration documents are provided;

With Europe More than 5000 brand suppliers have reached cooperation, covering almost all industry brands.