GUTEKUNST spring Z-051GI from Germany

European importGUTEKUNSTspringZ-051GI

GUTEKUNSTextension springZ-051GIDetailed parameter introduction

According to the information you providedZ-051GII have compiled the complete technical parameters of this tension spring for you in the data sheet.

Basic dimensional parameters:

wire diameter (d): 0.55 mm

pitch diameter (D): 6.00 mm

outer diameter (De): 6.55 mm(Calculated value:De = D + d = 6.00 + 0.55）, tolerance-0.25 mm.

Minimum liner diameter (Dh): 7.10 mm

Free spring body length (Lk): 9.08 mm

Free total length (L0): 17.20 mm(Tolerance ±)0.70 mm）

Hook and loop height (Lh):The data table does not directly provide numerical values.

Hook and loop opening width (m): 0.00 mm(The standard inventory status is closed hook and loop, and can be paid to cut open)

Hook and loop position offset angle: 180.0° ±25.0° (in the right-handed direction)

Mechanical performance parameters:

spring stiffness (R): 0.372 N/mm

Effective number of laps (n):The data table does not directly provide numerical values.

Total Turns (nt):The data table does not directly provide numerical values.

Initial tensile force (F0): 4.060 N

Maximum spring force (Fn): 18.0 N

Maximum deformation amount (sn): 66.11 mm

Maximum spring length (Ln):The data table does not directly provide numerical values.

itinerary (sh): 0.0 mm(It may indicate that there is no additional travel under standard parameters, or it needs to be calculated in conjunction with other parameters)

preload (F1):The data table does not directly provide numerical values.

Pre tightening length (L1):The data table does not directly provide numerical values.

Work load (F2):The data table does not directly provide numerical values.

working length (L2):The data table does not directly provide numerical values.

Work deformation (s2): 29.01 mm

Other parameters:

Single piece weight: 0.560 g

Winding around:Can be rotated left or right.

Hook and loop shape and position:German style hook and loop(German loop), shape1/1The two hook loops are offset relative to each other by about180Degree.

material:comply withEN 10270-1Standard steel wire.

Manufacturing Standard:Tolerance basisDIN 2097Test basisDIN ISO 2859-1Level 2.

Hook and loop status:The standard inventory is closed hook and loop (without openings). Payment can be made upon request to cut open the opening without delaying delivery.

Technical Characteristics and Application Analysis

Z-051GIIt is a small, lightweight, precision tension spring with initial tension, suitable for situations that require smooth linear tension.

1. Technical Features

Significant initial tensile force:have4.060NThe initial tension of the spring means that it needs to overcome this force before it starts to be stretched, effectively eliminating the mechanism gap and providing immediate response.

High elongation rate:The maximum deformation reaches66.11mmIt is a free length17.20mmThe agreement3.8Plus, it provides a larger work schedule.

Low stiffness: 0.372 N/mmThe stiffness of the material allows for a gradual increase in force during stretching, making it suitable for scenarios that require gentle and controllable tension.

Closed hook and loop design:The standard closed hook and loop has high strength and is suitable for hanging holes or pin shaft installation. The opening hook and loop need to be customized.

lightweight:Weight only0.56Ke is beneficial for applications that are sensitive to overall weight.

2. Typical application scenarios

Precision weighing and force measuring mechanism:Used in spring scales, tension gauges, or measuring instruments that require constant and small tension, its initial tension helps to improve the accuracy of the measurement starting point.

Automatic reset mechanism:Provide smooth reset tension in printer carts, scanner modules, or automatic doors.

Tensioning and anti loosening device:Tensioners used for cables, hoses, belts, or chains to eliminate slack and maintain stable system tension.

Safety protection device:Such as emergency brake pull rope and protective cover linkage cable, ensure that the protective device can be reliably pulled back or triggered when needed.

Toys and Models:Provide a tensile power source for the moving parts of toys.

3. Selection and usage precautions

Initial tension consideration:When designing, it is necessary to consider4.060NThe initial tensile force is included in the calculation, which is the starting load for the spring to work.

Installation method:The standard is180The German style hook and loop with degree deviation should be installed with sufficient space to accommodate the hook and loop and its deviation angle. useDh=7.10mmThe bushing or pin can ensure the smooth operation of the spring.

Hook and loop opening:If you need to hang the spring onto an existing pin, please indicate in the order "Cut the hook and loop opening" and be aware of any additional costs that may arise.

Travel restrictions:The working length should not exceed the maximum spring lengthLn(can be based onFnandRCalculate to avoid pulling force exceeding the maximum spring force18.0NAnd it leads to deformation.

fatigue life:If used in dynamic cyclic stretching situations, reference should be made to the instructions on "production compensation" in the data sheet, and special treated springs may need to be selected.

GUTEKUNST spring Z-051GI from Germany

GUTEKUNST spring Z-051GI from Germany

Shanghai Zhuming Advantage Brands:

Shanghai Zhuming Advantage Model：

GUTEKUNSTspringD-180H

GUTEKUNSTspringD-207H

GUTEKUNSTspringD-063H

GUTEKUNSTspringD-068A-01

GUTEKUNSTspringD-145C

GUTEKUNSTspringD-075A-01

GUTEKUNSTspringD-033

GUTEKUNSTspringD-026Q-11

GUTEKUNSTspringD-200B

GUTEKUNSTspringD-074B

GUTEKUNSTspringD-023

GUTEKUNSTspringD-173B

GUTEKUNSTspringD-063A

GUTEKUNSTspringD-173F

GUTEKUNSTspringD-118

GUTEKUNSTspringD-179E

GUTEKUNSTspringD-042

GUTEKUNSTspringD-169

GUTEKUNSTspringD-180X

GUTEKUNSTspringD-103

GUTEKUNSTspringD-194A

GUTEKUNSTspringD-090M-05

GUTEKUNSTspringVD-115E

GUTEKUNSTspringD-117O

GUTEKUNSTspringVD-143B

GUTEKUNSTspringVD-252A-02

GUTEKUNSTspring2.00*14.50*42.8（Z-142X）

GUTEKUNSTspringD-239A-05

GUTEKUNSTspringZ-093AX

GUTEKUNSTspringD-207JW

GUTEKUNSTspringVD-161

GUTEKUNSTspringD-284

GUTEKUNSTspringVD-306

GUTEKUNSTspringVD-310

GUTEKUNSTspringD-080B

GUTEKUNSTspringD-132B

GUTEKUNSTspringD-055A

GUTEKUNSTspringD-50A

GUTEKUNSTspringD-039A

GUTEKUNSTspringD-252A-09

GUTEKUNSTspringD108

GUTEKUNSTspringD-207K-04

GUTEKUNSTspringVD-114

GUTEKUNSTspringZ-072F-01L

GUTEKUNSTspringD-117J

GUTEKUNSTspringD152

GUTEKUNSTspring4594662001 BF2x15x3.5x1.4310 LINKS

GUTEKUNSTspringD-256A

GUTEKUNSTspringD-234BD

GUTEKUNSTspringD-288X-12

GUTEKUNSTspringVD-124

GUTEKUNSTspringD-179H

GUTEKUNSTspringD-207J-39

GUTEKUNSTspringD-247

GUTEKUNSTspringD-288K-13

GUTEKUNSTspringD-207JU

GUTEKUNSTspringD-288M

GUTEKUNSTspringZ-056X

GUTEKUNSTspringD-420

GUTEKUNSTspringD-090M-02

GUTEKUNSTspringD-153A

GUTEKUNSTspringD-180-04

GUTEKUNSTspringFEDER D-180-04

GUTEKUNSTspringD-207K-02

GUTEKUNSTspringD-090K

GUTEKUNSTspringVD-1800-01

GUTEKUNSTspringD188

GUTEKUNSTspringD-110AD-110A

GUTEKUNSTspringD-080DD-080D

GUTEKUNSTspringZ-066HIZ-066HI

GUTEKUNSTspringD-155D-155

GUTEKUNSTspringZ-042IZ-042I

About Zhuming Automation：

Shanghai Zhuiming Automation Technology Co., LtdShanghai Dreamingautotech Ltd. was founded in 2011 and is a professional supplier of imported industrial equipment and components. The company adheres to the service concept of "customer-centric", respects customer needs, provides professional technical support and flexible and effective supply chain management to ensure that customers receive high-quality products and services.

ØShanghai Zhuming has procurement facilities in GermanyofficeDirectly purchase from EU factories and enjoy local discounts in Europe;

ØProcessing consolidated orders at the source in Germany, centralized procurement and warehousing, German export customs clearance, significantly reducing additional fees such as customs clearance and operation fees;

ØWeekly flights guarantee delivery time, and expedited shipments can also be used International express delivery services such as DHL and UPS;

ØThe product is guaranteed to be imported from the original factory, and free original shipping and customs declaration documents are provided;

With Europe More than 5000 brand suppliers have reached cooperation, covering almost all industry brands.