S series custom encoder supply DHO514-2500S002

S series custom encoder supply DHO514-2500S002

GES60 series (industrial grade) magneto electric/14 bit RS485, 4-20mA, 1-5V, SSI

16. What are the multi turn encoders?

GEMPLE's multi turn encoders are currently marketed as full stroke encoders without electronic counting principles inside

And the battery.

If you are interested in this product or similar solutions, please contact BEI China sales supplier Paiyi (Shanghai) Measurement Technology Co., Ltd.

GEMPLE will also provide encoders with partial encoding and electronic counting according to market demand, but will definitely indicate their electronic components

Counting features.

There are so many laps in the entire journey

Model Series

Single cycle resolution and number of cycles

(Number of digits)

output signal

GAX60 series 8192x4096

25 people in total

SSI、RS485、Canopen

4-20mA (16 bit FS)

GMX425 series 4096x4096, or 1024x16384

24 people in total

SSI、RS485、modbus、Canopen

Profibus DP, 4-20mA or 1-5V

(Intelligent configurable)

GEX38 Small Series 4096x41024x16256x64

14 people in total

RS485、4—20mA、1—5V

Forward and reverse output, or half way output optional

GEX60 series 4096x41024x16256x64

64x256

RS485、4—20mA、1—5V、 Parallel (13 bits);

（1024x4、256x16--SSI、Canopen）

17. What is an intelligent encoder?

The intelligent encoder is an invention of GEMPLE, which has a built-in 32-bit intelligent chip MCU and a setting

Software Easypro, can be connected to a computer for settings, an intelligent encoder integrates digital RS485 output and analog current

4-20mA output, suitable for various applications of encoders, such as angle measurement, length measurement, speed measurement, electronic cam switch output

The output switches for output, overspeed, and low-speed can all be directly output and applied through intelligent settings, and can be used for signal RS485

Set baud rate, address, and resolution. For signals 4-20mA, zero point, full point, and rotation direction can be set, and power can be applied

Flow calibration. In addition, digital signals can be converted into various fieldbus, Ethernet, wireless, and so on as needed, and encoded accordingly

The device has entered the era of intelligence, providing a sensor base for the intelligent management of factory equipment and the Internet of Things in terms of angle, length, and speed

Basic.

If you are interested in this product or similar solutions, please contact BEI China sales supplier Paiyi (Shanghai) Measurement Technology Co., Ltd.

1. What is the difference between incremental encoders and encoders?

Incremental encoders generally have open collector output, voltage output, or linear output, outputting A-phase, B-phase, Z-phase pulses, etc

If the position still needs to be recorded without power outage, an incremental encoder can be used, which can be connected to the high count function

PLC, It can also be connected to commonly used counters.

The output of the encoder is binary code or Gray code, which can record the current position even after power failure Encoder required

To connect to an encoder interface board such as CQM1H-ABB21, the high count counter of a regular PLC cannot be connected to the encoder or

If the action frequency is not very high and the voltage meets the specifications, the encoder can also be connected to the ordinary input point of the PLC

The program can also be programmed according to the specifications of the encoder output code.

S series custom encoder supply DHO514-2500S002

DHM510-2048-002

DHM510-0600-001

DHO508-1440-003

DHO514-0300S001

DHO514-2500S002

CHM506-12BTS001

CHM912-13BT-012

JHM510-1800-001

DHM510-0500-038

PHK512-1312-002

DHO514-1024-080

DH0514-2500-003

DHK510-1024-002

CHK508-14BTS001

GHO514-0016-001

S series custom encoder supply DHO514-2500S002

The signal output includes sine wave (current or voltage), square wave (TTL, HTL), open collector (PNP, NPN), and various forms of push-pull, among which TTL is a long line differential drive (symmetrical A, A -); B,B-; Z. Z -), HTL also known as push-pull or push-pull output, the signal receiving device interface of the encoder should correspond to the encoder.

Signal connection - The pulse signal of the encoder is generally connected to a counter PLC、 Computers, PLCs, and modules connected to computers can be divided into low-speed modules and high-speed modules, with switch frequencies ranging from low to high.

As a single-phase connection, it is used for one-way counting and speed measurement.

A. B two-phase connection, used for counting forward and reverse directions, determining forward and reverse directions, and measuring speed.

A. B, Z three-phase connection, used for position measurement with reference position correction.

A. A -, B -, Z - connections, due to the connection with symmetrical negative signals, the current contributes zero electromagnetic field to the cable, with minimal attenuation, anti-interference, and can transmit over long distances.

For TTL encoders with symmetrical negative signal output, the signal transmission distance can reach 150 meters.

For HTL encoders with symmetrical negative signal output, the signal transmission distance can reach 300 meters.

If you are interested in this product or similar solutions, please contact BEI China sales supplier Paiyi (Shanghai) Measurement Technology Co., Ltd.