RuiSiJie Racelogic navigation acquisition and playback device

RLLS03-3P/2RP/2P/1RPRuiSiJie Racelogic navigation acquisition and playback device：

The radio frequency (RF) output of LabSat 3 is then connected to the antenna input of the tested device, and the recorded signal is played back as an RF signal. The tested device then began tracking the satellite as if traveling along the same route taken by LabSat 3 during the original recording period. One click recording/playback makes LabSat 3 very easy to operate. It is sturdy in construction and comes with a built-in battery and clear display screen. LabSat 3 can be easily applied to the same environment your product experiences in daily use, with little or no training required. A free file library from around the world that includes pre recording and simulation, allowing you to prepare and start operating as soon as possible.

Each LabSat can be tuned to one of the following three user selectable frequencies:

1. 1575.420 MHz – GPS L1、Galileo E1、SBAS、QZSS
2. 1602.000 MHz - GLONASS L1
3. 1561.098 MHz - Beidou B1
RLLS03-1P - Single Constellation Playback Only
RLLS03-1RP - Single Constellation Recording/Playback
RLLS03-2P - Dual Constellation Playback Only
RLLS03-2RP - Dual Constellation Recording/Playback
RLLS03-3P - Samsung Seat Playback Only RLLS03-3RP - Samsung Seat Recording/Playback

Users can generate their own test scenarios and use manual signals to create their own custom test scenarios. SatGen software allows you to quickly draw routes using Google Maps, automatically generate RF files, and then transfer the files to the SD card on LabSat 3 for playback. Multiple satellites and constellations can be simulated, and users can also control speed, heading, and altitude data. Suitable almanacs can be automatically or user-defined. LabSat 3 can also import KML and NMEA files, with user-defined time, date, and dynamics. 30 day demo version of SatGen * * * 2-minute scene, available from LabSat website. What other materials can I record at the same time? You can record CAN, serial, or digital data information together with satellite signals. When replaying files, the embedded data will be copied simultaneously and synchronized within 60 nanoseconds. You can also embed a 1PPS signal using an internal GPS receiver.

RuiSiJie Racelogic navigation acquisition and playback deviceAdditional features:

USB, RS232, and Ethernet ports are used for remote control
External 10 MHz reference input
Digital input/output for synchronization
Host USB port for USB sticks/hard drives
1PPS digital output

Each constellation uses approximately 14Gb of data per hour, and the suitable SD card is 128Gb *. Therefore, a single constellation can record for over 9 hours, a dual constellation can record for 4.5 hours, and a three-star constellation can record for 3 hours

*Storage devices with a capacity greater than 32GB need to be formatted as FAT32 using a PC utility

LabSat 3 can record and replay the following signals:

GPS: L1/L2/L5
GLONASS: L1/L2/L3
BeiDou: B1/B2/B3
QZSS: L1/L2/L5
Galileo: E1/E5a/E5b/E6
NavIC: L1/L5/S
SBAS: WAAS,EGNOS,GAGAN,MSAS,SDCM