Rubber tensile strength testing machine

Product Name:Rubber tensile strength testing machine

Product model: XK-8016

Usage description:

Rubber tensile strength testing machineBy using different testing fixtures, tensile strength, tear strength, elongation at break and other tests can be carried out, controlled by a computer system and equipped with a large deformation extension device. It is also possible to test the tear strength of vulcanized rubber or thermoplastic rubber. The determination of rubber tear strength is divided into pant tear, right angle tear, and crescent specimen tear tests. The tensile speed of the pants shaped specimen is (100 ± 10) mm/min, and the tensile speed of the right angle or crescent shaped specimen is (500 ± 50) mm/min.

Test principle: It is to use a tensile testing machine to continuously stretch a specimen with or without a cut at a specified speed until the specimen is torn off. Show the tear strength of the measured force value according to the prescribed calculation method.

Execution standards: GB/T529, ISO34-1

Product Features:

Elegant exterior design - dynamic base complemented by aluminum extruded sheet columns treated with advanced baking paint;

Precise transmission mechanism - using high-precision, ball screw and synchronous belt as the guarantee of transmission system accuracy;

Control method - fully computerized data acquisition and motion control;

*The software features - a fully open testing software under the Windows XP operating system. Users can use the existing functions of the software to complete almost all mechanical testing projects, or edit the testing methods according to their actual needs. The test results can be shared with most automated office software such as Office;

Ultra high testing accuracy - better than 0.5 level force measurement accuracy, 1/10000 force resolution, and deformation measurement resolution up to 0.01mm;

4. Specification parameters:

a、 Software system:

A. Modular functionality of testing standards: Provides users with the ability to set testing standards for their desired applications, covering GB, ASTM, DIN, JIS, BS, and more. The operation interface is concise, clear, and easy to learn and understand for operators

B. Sample data: Provide users with the ability to set all sample data, input data once * reuse. And the formula can be self modified to improve the fit of the test data.

C. Dual report editing: * Open user editing reports for testers to choose from

D. The lengths, force units, and display digits are dynamically interchanged, with force units in Kg, N, KN, g, lb and deformation units in mm, cm, and inch.

E. Automatic scaling of graph curves with Auto Scale allows the graph to be displayed at * scale. And it can dynamically switch graphics in real-time during testing. It has load displacement, load time, displacement time, and multi curve comparison.

F. The test results can be output in the form of EXCEL data format.

G. After the test is completed, it can be automatically archived or manually archived. After the test is completed, the maximum strength, upper and lower yield strengths, tensile strength, compressive strength, elongation strength at any point, load extension at any point, elastic modulus, elongation rate, peel interval maximum value, minimum value, average value, bending modulus, and so on will be automatically calculated. Data backup: Test data can be saved on any hard drive partition.

H. The software has the function of demonstrating historical test data

1) Characteristics:

2) Control method:

Computer software sets various control methods such as speed, load fracture (rupture), running time, etc

Computer keyboard operation, convenient for calibration and positioning during specimen installation

Automatic determination of material fracture, crushing, etc. and automatic shutdown, with the option to set automatic return

3) Curve type: The vertical and horizontal coordinates of the curve can be set arbitrarily.

Load displacement, load time, displacement time.

Stress strain, strain time, stress time.

4) Test data available:

Strength maximum value, strength minimum value, fracture value, tensile strength, compressive strength, elongation, peel interval maximum value, minimum value, average value, etc. (Customers need to select before placing an order)

5) The testing modes are available for selection as follows:

(1) Tensile test (2) Tear test (3) Peel test (4) Compression test (5) Flexural test (fixture selection)

b、 Hardware specifications:

Induction method: Load element

Machine capacity: 100kg (optional 200kg)

Unit conversion: kgf, lbf, N, etc

荷重精度： ±0.5%

Load decomposition degree: 1/10000

Capacity segmentation: Seven levels throughout the process: * 1, * 2, * 5, * 10, * 20, * 50, * 100, using high-precision 24 bits A/D, sampling frequency 100Hz

Zui large stroke (excluding fixtures): 800mm

Test speed: 1-500mm/min keyboard input computer free control, can be set arbitrarily

Speed accuracy: ± 1%

Displacement decomposition degree: 0 01 mm

Data sampling frequency: 200time/sec

Signal transmission method: RS 232 serial port (can be connected to a computer)

Display device: computer display

Display mode: Color written, displayed in both Chinese and English

Motor power: stepper motor

Unit switching: including multiple measurement units, users can also customize the required units

Shutdown mode: upper and lower limit safety settings, emergency stop switch, program force and extension settings, specimen damage sensing

Special function: Can achieve elongation at break and elongation between two points (large deformation device)

Machine weight: approximately 80KG

Power supply: 1x, 220V, 10A, or

Automatic chart recorder: shall comply with the requirements of GB/T12833 standard

Test report content: Customers can freely set it themselves

Note: Our company currently has multiple models of tensile testing machines, which can be customized according to customer testing needs!