Rosemount 9901 bypass pipe

Rosemount 9901 includes a series of high-quality bypass pipes for installing level measurement and control instruments on the exterior of process vessels. This series adopts a design that complies with the PED (Pressure Equipment Directive) according to ASME B31.3 or B31.1, allowing users to purchase integrated screws

Rosemount ® 9901 includes a series of high-quality bypass pipes for installing level measurement and control instruments on the exterior of process vessels.

This series adopts a design that complies with the PED (Pressure Equipment Directive) according to ASME B31.3 or B31.1, allowing users to purchase an integrated bolted instrument solution or only purchase a bypass pipe for use with existing instruments.

The 9901 series only uses certified and traceable materials, manufactured with full penetration welds, and welders and welding procedures that comply with ASME and European standards. All bypass pipes undergo hydraulic testing upon completion, and currently all series of NDT or customer inspection options can be ordered.

Adapt to the standardized or customized design of existing containers

Can install process level instruments externally

Can perform real-time maintenance

Design in accordance with ASME B31.3

Provide products that comply with ASME B31.1 as requested

Compliant with the Pressure Equipment Directive (PED)

Used in major industrial sectors worldwide

Very suitable for important areas and general applications

Various process connectors and optional drain/exhaust connectors

Over 50 years of experience in designing and manufacturing bypass pipes in accordance with international standards

Instrument isolation installation is required

Real time maintenance

safe operation

Hazardous liquids

High pressure and high temperature applications

Mandatory installation of bypass pipes for storage tanks

blender

heat exchanger

Hazardous liquids

The internal structure of the tank is complex

Waveguide tube

Used as a waveguide under turbulent conditions

​​​​​​​​​​​​​​​​​

structural material

Only materials suitable for use in pressurized environments and certified by ASME B31.3 can be used to manufacture bypass pipes. You can also place special orders for other materials. Bypass pipe material component carbon steel stainless steel Instrument installation flange ASTM A105 ASTM A182 F316/F316L Main bypass pipe ASTM A106 B 级 ASTM A312 TP316/TP316L Bypass pipe end cap ASTM A105 ASTM A182 F316/F316L Process flange/joint ASTM A105 ASTM A182 F316/F316L T-joints and variable diameter pipes (T-shaped design) ASTM A234 WPB ASTM A403 WP316/WP316L–S

pressure rating

Maximum pressure rating of 9901 bypass pipe Carbon steel bypass pipe Stainless steel bypass pipe Bypass pipe rated value(1) PSI (68°F) Bar (20°C) PSI (752°F) Bar (400°F) PSI (68°C) Bar (20°F) PSI (752°C) Bar (400°F) ASME B16.5 Class 150 285 19.6 95 6.5 275 19 95 6.5 ASME B16.5 Class 300 740 51.1 505 34.7 720 49.6 425 29.4 ASME B16.5 Class 600 1480 102.1 1015 69.4 1440 99.3 55 58.9 ASME B16.5 Class 900 2220 153.2 1520 104.2 2160 148.9 1280 88.3 ASME B16.5 Class 1500 3705 255.3 2517 173.6 3600 248.2 2135 147.2 EN1092 PN16 232 16 137 9.5 227 15.7 134 9.3 EN1092 PN25 362 25 214 14.8 356 24.6 211 4.6 EN1092 PN40 580 40 345 23.8 69 39.3 339 23.4 EN1092 PN63 913 63 543 37.5 899 62 536 37 EN1092 PN100 1450 100 862 59.9 1427 98.4 851 58.7 EN1092 PN160 2320 160 1380 95.2 2291 158 1361 93.9 EN1092 PN250 3625 250 2157 148.8 3567 246 2132 147

temperature rating

Maximum pressure rating of 9901 bypass pipe material Temperature range of bypass pipe(1) Carbon steel bypass pipe 14 to 752 ° C (-10 to 400 ° C) Stainless steel bypass pipe -148 to 752 ° F (-100 to 400 ° C)