Rosemount 8800D series vortex flowmeter

The Reducer vortex flowmeter does not require on-site installation of tapered pipes, and each installation can save up to 40% of costs. The MultiVariable vortex flowmeter eliminates the need for external temperature compensation in saturated steam measurement, resulting in cost savings of up to 30% per installation. Personally

Reducer ™ Vortex flow meters do not require on-site installation of tapered pipes, and each installation can save up to 40% of costs.

MultiVariable ™ The vortex flowmeter eliminates the need for external temperature compensation in saturated steam measurement, thus saving up to 30% of costs per installation.

Personally understand how the Rosemount 8800 vortex flowmeter solves your flow problems.

Reduce engineering, installation, and commissioning costs

Rosemount offers vortex flowmeter calibers suitable for various applications, reducing engineering costs.

Reducer ™ The vortex flowmeter eliminates the need for on-site installation of tapered pipes.

Compared to traditional flow meter installation, vortex flow meters can save up to 40% of installation costs.

The Rosemount vortex flowmeter has completed pre configuration and hydrostatic testing, and can be installed at any time.

Improve factory availability

Avoiding costly unexpected shutdowns caused by undetected process changes

The Rosemount vortex flowmeter adopts an unobstructed body structure, eliminating the possibility of clogging the pulse pipeline or damaging the diaphragm on the remote seal

Can replace sensors without damaging the process seal

Reduce maintenance costs

Avoiding maintenance costs associated with pulse pipelines, such as blockages and cleaning

No need for regular recalibration

One backup sensor is suitable for all instruments

Enhance security and environmental compliance

The gasket free instrument body reduces potential leakage points

Simplified SIS compliance using dual vortex flowmeter and FMEDA analysis

Equipment diagnosis makes verification and troubleshooting easier

Each standard vortex flowmeter is equipped with an internal signal generator, making electronic calibration simple

Can easily receive external sources of information

Diagnosis comes with helpful information to make troubleshooting easier

The Rosemount 8800 vortex flowmeter is suitable for liquid, gas, and steam applications. The high performance of the Rosemount 8800 flowmeter can solve your most demanding flow application needs in the following ways:

Eliminate blockage issues related to pulse pipelines (and other vortex products)

Adopting a gasketless instrument body design to reduce potential leakage points

Using mass balance sensors and adaptive digital signal processing for anti vibration

The unique isolation sensor design allows for replacement without damaging the process seal

Main specifications
Flow meter accuracy	The measurement accuracy of liquid is ± 0.65% of the flow rate The measurement accuracy of gases and vapors is ± 1% of the flow rate
turndown ratio	38:1
Output	4-20 mA， Based on HART ® 4-20 mA， Equipped with HART ® Adjustable pulse output FOUNDATION ™ Fieldbus with 2 analog input blocks, 1 backup link active scheduler function block, and 1 integrator function block (optional 1 PID function block)
Liquid receiving material	Stainless steel -316 ⁄ 316L and CF3M Nickel alloy C-22 and CW2M For other liquid receiving material options, please consult the manufacturer
Flange options	ANSI Class 150 to 1500 DIN PN 10 to PN 160 JIS 10K to 40K Provide a variety of flange faces
Operating temperature	-330 ° F to 800 ° F (-200 ° C to 427 ° C)
caliber	Flange type - from 1/2 in to 12 in (15 to 300 mm) Clamping type -1/2 inch to 8 inches (15 to 200 mm) Double Type - Half in to 12 in (15 to 300 mm)