Rosemount 5900S radar level gauge

Have you ever considered obtaining tank level data with an accuracy of 0.5 millimeters while complying with the latest and future spill prevention standards to address current and future challenges? Verified trade handover accuracy can be obtained using the 5900S level gauge. For various types of

Addressing current and future challenges

Have you ever thought about obtaining tank level data with an accuracy of ± 0.5 millimeters while complying with the latest and future spill prevention standards?

Verified trade handover accuracy can be obtained using the 5900S level gauge. Provide excellent measurements for various types of storage tanks and media such as liquefied gas, light products, heavy fuel oil, and asphalt.

By combining the use of 5900S and average temperature measurement equipment, uncertainty is reduced and accurate net flow calculation of high-performance tank metering systems is achieved. The tank data is transmitted to the control room and displayed on the host or TankMaster inventory software package

Using 5900S can improve safety and reliability. The liquid level gauge has passed SIL 2 and SIL 3 certification. The bus is a 2-wire system, which enables convenient and safe installation.

The unique 2-in-1 solution of integrating two independent radar units into one housing can improve safety, reliability, and save installation costs.

Realize cost savings, quick installation, and access to more data through wireless options. Wired systems can be used in parallel with wireless devices, providing redundancy.

Maximize the accuracy of inventory and trade handover for various storage tanks and products

Different antenna options: parabolic antenna, horn antenna, waveguide array antenna, liquefied petroleum gas/liquefied natural gas antenna

Non contact type, making the liquid level gauge basically unaffected by process conditions

Two in one level gauge is an economical way to achieve redundancy

Wireless level gauges are more economical to install, can obtain more data, and achieve redundant communication

Compliant with IEC 61508-2 and 61508-3, certified with SIL 2 and SIL 3 by Exida

According to WHG regulations, the anti overflow tank protection T Ü V test was conducted and certified

No movable parts, meaning minimal or no maintenance is required

Usually installed during tank operation (excluding pressurized tanks) 5900S standard technical data

For more information on specific antenna data, please refer to the Rosemount 5900S product data sheet.

Instrument accuracy:

± 0.5 millimeters (± 0.020 inches)

Environmental working temperature:

-40 to+70 ° C (-40 to+158 ° F)

Dangerous Place Certification:

ATEX, FM-C, FM-US, IECEx, and national certifications

Statutory trade handover type certification:

OIML R85:2008 and national certifications such as PTB, NMi, etc

Security/Overflow:

Certified with SIL 2 and SIL 3

Anti overflow tank protection has been tested by T Ü V and certified by WHG

Intrusion protection:

IP 66/67 and Nema 4X

Shell material and surface treatment:

Polyester paint coated die cast aluminum material

Power Supply:

FISCO: 9.0-17.5 VDC without distinguishing positive and negative poles

Entity: 9.0-30.0 VDC without distinguishing positive and negative poles

Fieldbus (standard):

FOUNDATION ™ Fieldbus FISCO (Tankbus)

Weight:

5900S transmitter header: 5.1 kg (11.2 lb) for single version, 5.4 kg (11.9 lb) for 2-in-1 version

5900S with horn antenna: approximately 12 kilograms (26 pounds)

5900S with parabolic antenna: approximately 17 kilograms (37 pounds)

5900S with waveguide array antenna: approximately 13.5-24 kilograms (30-53 pounds)

5900S with liquefied petroleum gas/liquefied natural gas antenna: approximately 30 kilograms (66 pounds) for 6 inches and 150 psi; For 6 in, 300 psi, approximately 40 kilograms (88 pounds)

On site data shows:

Rosemount 2230 Graphic Field Display Unit

Antenna:

All antennas are self drip type that comply with API (Chapter 3.1 B, 1st edition) requirements.

Rosemount 5900S with parabolic antenna:

The preferred product for installation on fixed roof storage tanks

The design of the antenna has strong resistance to viscous and severely condensed products such as asphalt and tar

Rosemount 5900S with waveguide array antenna:

Typical applications include crude oil storage tanks with external floating roofs and gasoline/finished oil storage tanks with or without internal floating roofs

Resistant to internal rusting and product deposition in pipelines

Provide fixed and hinged open plates suitable for installation on pipes of 5, 6, 8, 10, and 12 inches. The hinged open version can be used for sampling or manual tilt calibration of products of all pipeline sizes

Rosemount 5900S with horn antenna:

Suitable for fixed roof storage tanks with 200mm (8 inches) or larger nozzles

When the nozzle is close to the tank wall, the inclined flange option can be used

Rosemount 5900S with liquefied petroleum gas/liquefied natural gas antenna:

Suitable for liquid level measurement of liquefied gases generated under pressure or low temperature

Fireproof ball valve can isolate the process and facilitate maintenance

By using pressure sensors, volume deviations caused by steam can be corrected to achieve optimal measurement performance

Measurement and calibration of storage tanks in operation: The calibration needle installed in the waveguide hole and the deflection plate with calibration ring located at the end of the pipeline below can provide reference echoes within a fixed distance and a universal distance